Dell Tertiary IDE Channel Controller , v. 1.00.2002.0701, A00
已自动安装 此文件是作为最近更新的一部分自动安装的。如果您遇到任何问题，您可以手动下载并重新安装。此页面的内容可能已自动翻译。要提供反馈，请填写页面底部的表单。
Required driver for Tertiary IDE Channel under Windows 2000
推荐
以管理员身份登录 Windows 以使用自动扫描。如果您已以管理员身份登录并看到此消息，请重新启动。 您的系统由 IT 管理员管理，并且功能可能受限。
查找更多更新。使用 SupportAssist 查找适用于您的设备的所有最新驱动程序更新。
补丁和增强功能
This is a new release.
了解详情版本
1.00.2002.0701, A00
发布日期
30 8月 2002
下载类型
驱动程序
类别
IDE/EIDE
重要性
可选Dell Technologies 建议查看此更新以确定它是否适用于您的系统。此更新包含仅影响特定配置的更改，或者提供不一定不适用于您的环境的新功能。
受支持的操作系统
Windows 2000
安装说明
Default Instructions for dell3idea00.exe:
Installation
1. Download the file to a directory on your hard drive. The file
downloaded is self extracting.
2. Execute this file to extract the files compressed within it. These
files can be extracted to a diskette or to a
directory on your hard drive. Remember this location.
3. Log on as an Administrator (if not already). Windows 2000 OS starts;
displays a message that new hardware has been detected, and starts
the 'Found New Hardware Wizard'.
4. Click 'cancel'.
5. After Windows 2000 server installation is completed, install Service
pack 2 (SP2). Documentation may be supplied with the OS, or may be
downloaded from Microsoft or DELL website.
6. After the installation is complete, Windows 2000 restarts, and 'Found
New Hardware Wizard' appears.
7. Click 'cancel'.
8. Browse to the location the files were extracted to in step 2 above,
select the "Force.bat" file, and click 'open'.
9. When and if the Microsoft Digital Signature dialog boxes for the
ServerWorks PCI IDE controller or ServerWorks Primary/Secondary IDE
controller or DELL tertiary IDE controller appear, click Yes to continue.
10. The driver installation will be completed, and you will be prompted
to reboot the system. Click Yes, and reboot the system.
11. Enter the BIOS setup, and ensure that the third channel master and
slave (if needed) devices have been turned on or are in Auto mode. This
will enable the tertiary IDE drive channel.
12. In the BIOS setup, make sure that maximum UDMA mode is set to ATA-
100. This applies to the primary channel hard disk drives, and secondary
channel devices (CDROM and Tape Back Up unit)).
13. You may recheck the 'Device Manager'. The yellow bang against the
RAID controller in 'other devices' should not appear. Expand the IDE
devices sections. DELL tertiary IDE channel and DELL tertiary IDE
controller will be listed.
14. This completes the installation of the driver, and your system is
ready to access and fully utilize the hard disk drives connected to the
third IDE channel.
Installation
1. Download the file to a directory on your hard drive. The file
downloaded is self extracting.
2. Execute this file to extract the files compressed within it. These
files can be extracted to a diskette or to a
directory on your hard drive. Remember this location.
3. Log on as an Administrator (if not already). Windows 2000 OS starts;
displays a message that new hardware has been detected, and starts
the 'Found New Hardware Wizard'.
4. Click 'cancel'.
5. After Windows 2000 server installation is completed, install Service
pack 2 (SP2). Documentation may be supplied with the OS, or may be
downloaded from Microsoft or DELL website.
6. After the installation is complete, Windows 2000 restarts, and 'Found
New Hardware Wizard' appears.
7. Click 'cancel'.
8. Browse to the location the files were extracted to in step 2 above,
select the "Force.bat" file, and click 'open'.
9. When and if the Microsoft Digital Signature dialog boxes for the
ServerWorks PCI IDE controller or ServerWorks Primary/Secondary IDE
controller or DELL tertiary IDE controller appear, click Yes to continue.
10. The driver installation will be completed, and you will be prompted
to reboot the system. Click Yes, and reboot the system.
11. Enter the BIOS setup, and ensure that the third channel master and
slave (if needed) devices have been turned on or are in Auto mode. This
will enable the tertiary IDE drive channel.
12. In the BIOS setup, make sure that maximum UDMA mode is set to ATA-
100. This applies to the primary channel hard disk drives, and secondary
channel devices (CDROM and Tape Back Up unit)).
13. You may recheck the 'Device Manager'. The yellow bang against the
RAID controller in 'other devices' should not appear. Expand the IDE
devices sections. DELL tertiary IDE channel and DELL tertiary IDE
controller will be listed.
14. This completes the installation of the driver, and your system is
ready to access and fully utilize the hard disk drives connected to the
third IDE channel.