Dell SAS 6/IR Integrated Blades, v.00.25.47.00.06.22.03.00 , A04

Reinicio requerido INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Dell Sas6/iRi Blades Firmware Release; Package Version: 00.25.47.00.06.22.03.00
Recomendado

Encuentre la mejor descarga para su sistema

Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema

Buscar soporte

Ingrese su modelo o etiqueta de servicio de Dell

¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo

Este controlador no es compatible

Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.

Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.

Correcciones y mejoras

BIOS - 06.22.03.00
NEW FUNCTIONALITY: None.
DEFECT FIXES:
-Implements a change to allow some RAID1 volumes created with earlier
SAS 6/iR FW revisions to be migrated to controllers with this FW revision.
- Implements a change to order the controller list based on defined
controller type instead of static chip-based references
- Updates verify functionality to allow user to escape once
Reassign All has been selected and drive is no longer responding.
- Removes rescan for devices on any keystroke in view array screen.
Rescan will now only be performed on Alt+N keystroke.


FIRMWARE - 00.25.47.00
NEW FUNCTIONALITY:
- Modifies coercion of RAID volumes to align with PERC. This facilitates
migration of SAS6 RAID volumes to PERC6.
DEFECT FIXES:
-Implements a change to allow some RAID1 volumes created with earlier
SAS 6/iR FW Revisions to be migrated controllers with this FW revision or later.
-Improves robustness in handling Task Management events during heavy IO
-Implements a change to correct an issue with initialization of interposer
attached SATA drives where link to the drive could be left in a state where
it was possible that I/Os could be timed out and have to be retried by
the host.
Más información

Versión

00.25.47.00.06.22.03.00, A04

Fecha de publicación

06 dic 2011

Tipo de descarga

Firmware

Categoría

RAID SAS

Importancia

Recomendado
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles Ver información importante

Formato de archivo: Paquete de actualizaciones para MS Windows de 32 bits
File Name: SAS-RAID_Firmware_G5TG7_WN32_00.25.47.00.06.22.03.00_A04.EXE
Tamaño del archivo: 5.57 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Los paquetes de actualizaciones de Dell (DUP) en el formato de 32 bits de Microsoft Windows han sido diseñados para ejecutarse en los sistemas operativos de 64 bits de Microsoft Windows. Los paquetes de actualizaciones de Dell (DUP) en el formato de 64 bits de Microsoft Windows solo se ejecutarán en los sistemas operativos de 64 bits de Microsoft Windows. Al seleccionar una actualización de un controlador de dispositivo asegúrese de seleccionar el que sea apropiado para su sistema operativo.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
397950999fb22ac566fe5db78aca712f
SHA1:
6182bc9b8eedb3a5d6116f270ede17155eca93cf
SHA-256:
No disponible

Formato de archivo: Un archivo de GnuPG que contiene una firma criptográfica
File Name: SAS-RAID_Firmware_G5TG7_LN32_00.25.47.00.06.22.03.00_A04.BIN.sign
Tamaño del archivo: 194 Bytes
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
La firma GnuPG para el paquete de actualización para Red Hat Linux se puede usar para autenticar la identidad de Dell en el paquete de actualización para Red Hat Linux correlativo.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
7814ff42e271fc76a1179b84a5ebc83c
SHA1:
6c86e23c4538e3a5587706b1369506ca8f1597f3
SHA-256:
No disponible

Formato de archivo: ZipPack externo
File Name: DELL_SAS-6-IR-INTEGRATED-BLA_A04_R197384.exe
Tamaño del archivo: 564.03 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
2788df39a4fd0c424e456d5f89e4e7d4
SHA1:
671bbca434c660aaf7efd281d7518501da9128e2
SHA-256:
dab2fcf0b350025c2f650ef797bda50e534728cabc8314588ac118097a60d400

Formato de archivo: Notas de versiones externas
File Name: R197384.txt
Tamaño del archivo: 7.23 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo contiene texto sin formato que se puede ver con un editor de texto estándar.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
4b11813d93d89a8fe4b925773e0581a2
SHA1:
No disponible
SHA-256:
No disponible

Formato de archivo: Paquete de actualización para Red Hat Linux
File Name: SAS-RAID_Firmware_G5TG7_LN32_00.25.47.00.06.22.03.00_A04.BIN
Tamaño del archivo: 3.65 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Los paquetes de actualización de Dell para Linux se pueden utilizar como aplicaciones independientes que garantizan que se satisfagan los criterios de validación específicos, y luego aplicar una actualización.
Nota: los paquetes de actualización para Linux son de código abierto. Para obtener más detalles, consulte el archivo Léame de los paquetes de actualización de Dell para Linux.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
0e4702f6fee2be0433b43da22185ab5d
SHA1:
4f5c6b8f785b6d056513ef25a22fd0bb554eb0da
SHA-256:
No disponible

Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)

Detalles adicionales

Mostrar todo | Esconder todo
- When viewing SATA physical disk properties from Ctrl-C or other
management applications, Vendor Identification must be translated
as "ATA" followed by blanks. Please see SATA translation
specification, revision 5, pages 24-25 for more details.

- When adding a SAS 6/iR controller to a system, either by physically
adding an adapter or by enabling the integrated SAS controller in
the system BIOS, the new controller may need to be added to the
controller boot order in the SAS 6/iR BIOS configuration Utility.
At POST, hit CTRL-C to enter the utility and verify or modify the
controller boot order.

- Migration of RAID Volumes from SAS 6/iR controllers to PERC6 controllers
is supported only for volumes originally created on SAS 6/iR controllers
running FW revision 00.25.47.00 or later.

- This version of firmware will not ensure complete compatibility with an
older version of the management application.
OpenManage 5.5 or greater is recommended.

- It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.

- Before updating the SAS controller firmware using the DUP package in a Linux system, it is necessary to upgrade the SAS controller driver. Executing the SAS controller firmware DUP update while running a native Linux driver may cause the system/data volumes on the SAS controller to become inaccessible or Read-Only.

The recommended steps to update the SAS controller using the firmware DUP package on a Linux system to this new software level are as follows:
1.Upgrade the driver
2.Reboot the system
3.Upgrade the firmware
4.Reboot the system

The problem does not occur if the SAS controller FW is updated from a bootable device (non Linux environment).
SAS 6/IR Integrated Blades
Performing the Firmware Upgrade

NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.

1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.

Zip pack:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click onthe OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.

Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.


Windows Update Package:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Linux Update Package:

Download
1. Click the Download Now linkto download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.

GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.

Ayuda y tutoriales para controladores