Dell PERC 5/i Adapter Firmware Update
AUTOMATICKY NAINSTALOVÁNO Tento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.Obsah této stránky byl patrně přeložen automaticky. Chcete-li vložit zpětnou vazbu, vyplňte formulář ve spodní části stránky.
This package provides the Dell PERC 5/i Adapter Firmware Update and is supported on the Enterprise Servers and Powervault models that are running the following Operating System: NA.
Doporučeno
Vyhledejte nejlepší soubor ke stažení pro svůj systém.
Chcete-li zobrazit nejnovější informace o ovladači pro svůj systém, zadejte podrobnosti produktu.Vyhledat podporu
Zadejte výrobní číslo Dell nebo model.
Chcete vyhledat svůj produkt? Vložte identifikátor produktu. Ukázat způsob
Tento ovladač není kompatibilní
Tento ovladač není určen pro vybraný produkt. Vyberte jiný produkt a vložte údaje o produktu pro tento ovladač nebo navštivte stránku podpory produktu a podívejte se na všechny ovladače pro jiný produkt.
Chcete-li používat automatickou kontrolu, přihlaste se do systému Windows jako správce. Pokud jste již přihlášeni jako správce a zobrazí se tato zpráva, restartujte počítač. Váš systém spravuje správce IT – funkce mohou být omezené.
Najděte více aktualizací. Použijte nástroj SupportAssist k vyhledání nejnovějších aktualizací ovladačů.
Opravy a vylepšení
Fixes
- DeviceType on the Device Manager display has been corrected to show the proper device type: RAID
- Disk Timeout has been increased from 60 seconds to 65 seconds to safely allow drives to complete recovery.
Enhancements
- Added a bus rescan after a logical volume are initialized to effectively remove stale data. This will allow the OS to invalidate its cache data.
Další informace- DeviceType on the Device Manager display has been corrected to show the proper device type: RAID
- Disk Timeout has been increased from 60 seconds to 65 seconds to safely allow drives to complete recovery.
Enhancements
- Added a bus rescan after a logical volume are initialized to effectively remove stale data. This will allow the OS to invalidate its cache data.
Verze
5.2.2-0072, A09
Datum vydání:
09 kvě 2012
Typ souboru ke stažení
Firmware
Kategorie
Pole RAID SAS
Důležitost
DoporučenoSpolečnost Dell Technologies doporučuje použití této aktualizace při příštím plánovaném cyklu aktualizací. Aktualizace obsahuje změny, které zachovají celý systém v dobrém stavu. Zajišťuje aktuální stav systémového softwaru a kompatibilitu s dalšími moduly systému (firmware, BIOS, ovladače a software) a může obsahovat další nové funkce.
Dostupné formáty Zobrazit důležité informace
Formát souboru: Aktualizační sada pro 32bitový systém MS Windows.
Název souboru: SAS-RAID_Firmware_10DNJ_WN32_5.2.2-0072_A09.EXE
Velikost souboru: 6.24 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Balíčky Dell Update Package (DUP) ve 32bitovém formátu pro systém Microsoft Windows byly navrženy tak, aby je bylo možno spustit na 64bitové verzi operačního systému Microsoft Windows. Balíčky Dell Update Package (DUP) v 64bitovém formátu pro systém Microsoft Windows je možno spustit pouze na 64bitové verzi operačního systému Microsoft Windows. Při výběru aktualizace ovladače zařízení vyberte tu, která je vhodná pro váš operační systém.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
b38627244896f9ec0c22b4c4255f9cba
SHA1:
ee612c6ba3e9917d2d58514f888ba4a713d968ec
SHA-256:
Není k dispozici
Formát souboru: Jeden či více samorozbalovacích obrazů disku samorozbalovacího souboru Zip
Název souboru: BR189331.exe
Velikost souboru: 1.54 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Tento soubor obsahuje komprimovanou (případně komprimovanou do archivu ZIP) sadu souborů. Stáhněte soubor do složky na pevném disku a poté na něj poklepejte, rozbalí se sada souborů. Podle pokynů dokončete instalaci.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
6ac7c139a3b6832f83df162a1079d38c
SHA1:
Není k dispozici
SHA-256:
Není k dispozici
Formát souboru: Soubor GnuPG obsahující kryptografický podpis
Název souboru: SAS-RAID_Firmware_10DNJ_LN32_5.2.2-0072_A09.BIN.sign
Velikost souboru: 194 Bytes
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Podpis GnuPG pro aktualizační sadu systému Red Hat Linux lze použít k ověření identity společnosti Dell v příslušné aktualizační sadě systému Red Hat Linux.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
ef8ab60f2fdd1486c793796f5d13bd3c
SHA1:
e64239b4f43e682dd2ddbfb68f66c43989c71b7c
SHA-256:
Není k dispozici
Formát souboru: ZipPack (externí)
Název souboru: DELL_PERC-5-I-ADAPTER_A09_R189331.exe
Velikost souboru: 1.29 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Tento soubor obsahuje komprimovanou (případně komprimovanou do archivu ZIP) sadu souborů. Stáhněte soubor do složky na pevném disku, a poté jej spusťte (poklepejte na něj), rozbalí se sada souborů. Podle pokynů dokončete instalaci.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
1465ae7c9e94bfcae536ec1d468303a8
SHA1:
d0afe4d46b4c695cebf0c3c896f2be223542695a
SHA-256:
Není k dispozici
Formát souboru: Poznámky k externímu vydání
Název souboru: R189331.txt
Velikost souboru: 13.54 KB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Tento formát souboru obsahuje prostý text, který lze zobrazit pomocí standardního textového editoru.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
6db0e46508e97ee65ea117a7f85cd0d1
SHA1:
Není k dispozici
SHA-256:
Není k dispozici
Formát souboru: Aktualizační sada pro systém Red Hat Linux
Název souboru: SAS-RAID_Firmware_10DNJ_LN32_5.2.2-0072_A09.BIN
Velikost souboru: 4.31 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Aktualizační sady Dell pro systém Linux lze použít jako samostatné aplikace, které zajišťují splnění určitých kritérií ověření před provedením aktualizace.
Poznámka: Aktualizační sady pro systém Linux jsou Open Source. Podrobnosti k aktualizačním sadám Dell pro systém Linux naleznete v souboru ReadMe.
Poznámka: Aktualizační sady pro systém Linux jsou Open Source. Podrobnosti k aktualizačním sadám Dell pro systém Linux naleznete v souboru ReadMe.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
3e70db8f2b482562d37334d3db91f9e5
SHA1:
1389022e9c60ac3256b42cbe08e79ddc8cc8cc27
SHA-256:
Není k dispozici
Stažením souhlasíte s podmínkami Licenční smlouvy na software společnosti Dell. (anglicky)
Důležité informace
1. All RAID volumes will be presented as write through (WT) to the operating system (Windows and linux) independent of the actual write cache policy of the virtual disk.The controller manages the data in cache independently of the OS and any applications.Please use OpenManage or the BIOS Configuration Utility to view and manage virtual disk cache settings.
2. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification.
3. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
4. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID controller will immediately delete all virtual disks on that enclosure. To recover, power down the server and ensure all cables in the configuration are securely connected. When the server is powered on, the RAID controller will detect the disks as foreign and the configuration can be imported with a management application.
5. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hotspare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hotspare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
6. Prior to performing a virtual disk migration, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
7. This version of firmware will not ensure complete compatibility with an older version of the management application, OpenManage 5.0 or 5.1.OpenManage 5.2 or greater is recommended.
8. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
9. The firmware restricts the importing of virtual disks that are undergoing RAID level migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
10. Foreign dedicated hot spares are now imported as global hot spares.
11. Default Physical disk cache settings for hard drives are ON for SATA drives and OFF for SAS drives.
12. A EMM change or a drive migration is not a supported action during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.Dell recommends the user to take a data backup before starting these operations.
13. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility but can be done from the Dell Open Manage Storage Management Software.
2. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification.
3. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
4. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID controller will immediately delete all virtual disks on that enclosure. To recover, power down the server and ensure all cables in the configuration are securely connected. When the server is powered on, the RAID controller will detect the disks as foreign and the configuration can be imported with a management application.
5. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hotspare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hotspare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
6. Prior to performing a virtual disk migration, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
7. This version of firmware will not ensure complete compatibility with an older version of the management application, OpenManage 5.0 or 5.1.OpenManage 5.2 or greater is recommended.
8. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
9. The firmware restricts the importing of virtual disks that are undergoing RAID level migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
10. Foreign dedicated hot spares are now imported as global hot spares.
11. Default Physical disk cache settings for hard drives are ON for SATA drives and OFF for SAS drives.
12. A EMM change or a drive migration is not a supported action during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.Dell recommends the user to take a data backup before starting these operations.
13. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility but can be done from the Dell Open Manage Storage Management Software.
Podporované operační systémy
Není k dispozici
Platí pro
�
PERC 5/i Adapter
Pokyny k instalaci
2.0 Performing the Firmware Upgrade
===================================
Web pack:
---------
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save
this program to disk and click OK. The Save In: window appears.
3. From the "Save As" field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Zip pack:
---------
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Windows Update Package:
-----------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click
the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the "Install" button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
---------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Read over the release information presented by executing the
"./FRMW_LX_RXXXXXX.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN.
===================================
Web pack:
---------
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save
this program to disk and click OK. The Save In: window appears.
3. From the "Save As" field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
button to close the Self-Extracter window
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
3. Follow the on-screen instructions.
Zip pack:
---------
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
4. After flash is complete, remove bootable media.
5. Reboot system for changes to take effect.
Windows Update Package:
-----------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click
the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the "Install" button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
---------------------
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to
your hard drive.
Installation
1. Read over the release information presented by executing the
"./FRMW_LX_RXXXXXX.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing "./FRMW_LX_RXXXXXX.BIN" from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
----------------------------------------------------------------------------
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to
your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file,
FRMW_LX_RXXXXXX.BIN.
Nápověda a instruktáž k ovladačům
Další soubory ke stažení naleznete na adrese Ovladače a soubory ke stažení. Nápovědu k informacím uvedeným na této stránce naleznete na webu Nápověda a instruktáž k ovladačům.