VMware vCenter Plug-in for MD-Series Storage Arrays, version 2.5
Vyžadován restartAUTOMATICKY NAINSTALOVÁNOTento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.
Obsah této stránky byl patrně přeložen automaticky. Chcete-li vložit zpětnou vazbu, vyplňte formulář ve spodní části stránky.
Tento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.
VMware vCenter Plug-in for MD-Series Storage Arrays, version 2.5
Doporučeno
Vyhledejte nejlepší soubor ke stažení pro svůj systém.
Chcete-li zobrazit nejnovější informace o ovladači pro svůj systém, zadejte podrobnosti produktu.
Vyhledat podporu
Zadejte výrobní číslo Dell nebo model.
Chcete vyhledat svůj produkt? Vložte identifikátor produktu.Ukázat způsob
Nenalezeny žádné výsledky. Pro zadaný výraz nebylo nic nalezeno. Upravte vyhledávaný výraz a hledání opakujte.
Tento ovladač není kompatibilní
Tento ovladač není určen pro vybraný produkt. Vyberte jiný produkt a vložte údaje o produktu pro tento ovladač nebo navštivte stránku podpory produktu a podívejte se na všechny ovladače pro jiný produkt.
Chcete-li používat automatickou kontrolu, přihlaste se do systému Windows jako správce. Pokud jste již přihlášeni jako správce a zobrazí se tato zpráva, restartujte počítač.Váš systém spravuje správce IT – funkce mohou být omezené.
Najděte více aktualizací. Použijte nástroj SupportAssist k vyhledání nejnovějších aktualizací ovladačů.
Opravy a vylepšení
vCenter Plug-in Release 2.5 adds support for setting up asynchronous remote replication, using point-in-time (PiT) snapshots and performing enhanced automatic storage array discovery.
Společnost Dell Technologies doporučuje použití této aktualizace při příštím plánovaném cyklu aktualizací. Aktualizace obsahuje změny, které zachovají celý systém v dobrém stavu. Zajišťuje aktuální stav systémového softwaru a kompatibilitu s dalšími moduly systému (firmware, BIOS, ovladače a software) a může obsahovat další nové funkce.
Save Configuration Files Option Fails on Storage Arrays Running RAID Controller Firmware Version 7.35
ISSUE:
The Save Configuration Files option in the MD vCenter Plug-in fails to execute on storage arrays running RAID controller firmware version 7.35 and generates a validation error. The cause of this error is due to the presence of the 'securityType=' syntax on the command line argument. This syntax is not supported with this firmware version.
Script file example:
show "Creating RAID 0 Volume 1 on new Volume Group BW-Test2084."; // This command creates volume group and the initial volume <1> with offset 0 on the volume group. // NOTE: For Volume Groups that use all available capacity, the last Volume on this group is // created using all remaining capacity by omitting the capacity= volume creation parameter. create volume drives=(85,1) raidLevel=0 userLabel="1" volumeGroupUserLabel="BW-Test2084" 8240 Bytes dssPreAllocate=false securityType=none;
WORKAROUND: Storage arrays running RAID controller firmware version 7.35 should remove the 'securityType=' syntax from all Create Volume commands before validating or executing the script file from the MD Storage Manager (MDSM) Enterprise Management Window (EMW).
PROCEDURE: 1. Edit the script file to be used (for example, Array-1_20120122151509705.cfg). 2. Search the script file for the presence of the 'securityType=' command syntax. 3. Remove all occurrences of the 'securityType=' syntax. 4. Save the script file with a new name (preserve original). 5. From the MDSM Enterprise Management Window, right-click on the storage array to be configured and select Execute Script. 6. From the Script Editor, select File > Load Script and select the configuration file you saved in step 4. (You may have to change the file type drop-down option to All Files instead of Script File (*.script)). 7. Select Tools > Verify Syntax to verify the script is functional. 8. Select Tools > Verify and Execute to apply the script changes to the selected storage array. 1>
1. From the Drivers and Download page at www.support.dell.com, select your MD storage array model. 2. From the list of available downloads, choose vCenter Version 2.5 Plug-In from the Applications category. 3. Download the executable file to your system. 4. Launch the vCenter Plug-in installation wizard contained in the downloaded package. 5. Review and accept the license agreement, then follow the installation prompts. 6. Once the installation is complete, refer to the Dell PowerVault MD-Series Storage Array VMware vCenter Plug-In for MD-Series Storage Arrays Installation and Configuration Guide at support.dell.com/manuals for setup and configuration steps
To upgrade from a previous version of the MD vCenter Plug-in and use the same host server as the application server, run the latest installer on the current application server. The installation wizard will prompt for an administrator password before unregistering and upgrading your MD vCenter Plug-in version.