Adaptec CERC SATA 2s, v.6.0.50.5, A06
AUTOMATICKY NAINSTALOVÁNO Tento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.Obsah této stránky byl patrně přeložen automaticky. Chcete-li vložit zpětnou vazbu, vyplňte formulář ve spodní části stránky.
Dell CERC SATA 1.5/2s RAID Controller Device Driver for Windows Server 2000 and Windows Server 2003 (32-bit).
Doporučeno
Vyhledejte nejlepší soubor ke stažení pro svůj systém.
Chcete-li zobrazit nejnovější informace o ovladači pro svůj systém, zadejte podrobnosti produktu.Vyhledat podporu
Zadejte výrobní číslo Dell nebo model.
Chcete vyhledat svůj produkt? Vložte identifikátor produktu. Ukázat způsob
Tento ovladač není kompatibilní
Tento ovladač není určen pro vybraný produkt. Vyberte jiný produkt a vložte údaje o produktu pro tento ovladač nebo navštivte stránku podpory produktu a podívejte se na všechny ovladače pro jiný produkt.
Chcete-li používat automatickou kontrolu, přihlaste se do systému Windows jako správce. Pokud jste již přihlášeni jako správce a zobrazí se tato zpráva, restartujte počítač. Váš systém spravuje správce IT – funkce mohou být omezené.
Najděte více aktualizací. Použijte nástroj SupportAssist k vyhledání nejnovějších aktualizací ovladačů.
Opravy a vylepšení
- corrects potential I/O performance issues on RAID 1 arrays in cases where a failed hard drive has not yet been removed from or replaced in the system.
- corrects potential system hang condition in cases when a failed hard drive has not been removed from the system
- corrects a potential issue caused by a variable not being cleared properly.
- corrects an issue seen with management software when retrieving serial numbers from hard disks.
- corrects an issue where certain error conditions were not returning sense data per SATA specification.
Další informace- corrects potential system hang condition in cases when a failed hard drive has not been removed from the system
- corrects a potential issue caused by a variable not being cleared properly.
- corrects an issue seen with management software when retrieving serial numbers from hard disks.
- corrects an issue where certain error conditions were not returning sense data per SATA specification.
Verze
6.0.50.5, A06
Datum vydání:
11 zář 2006
Typ souboru ke stažení
Ovladač
Kategorie
Úložiště
Důležitost
DoporučenoSpolečnost Dell Technologies doporučuje použití této aktualizace při příštím plánovaném cyklu aktualizací. Aktualizace obsahuje změny, které zachovají celý systém v dobrém stavu. Zajišťuje aktuální stav systémového softwaru a kompatibilitu s dalšími moduly systému (firmware, BIOS, ovladače a software) a může obsahovat další nové funkce.
Dostupné formáty Zobrazit důležité informace
Formát souboru: Aktualizační sada pro 32bitový systém MS Windows.
Název souboru: DRVR_WIN_R126743.EXE
Velikost souboru: 5.01 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Balíčky Dell Update Package (DUP) ve 32bitovém formátu pro systém Microsoft Windows byly navrženy tak, aby je bylo možno spustit na 64bitové verzi operačního systému Microsoft Windows. Balíčky Dell Update Package (DUP) v 64bitovém formátu pro systém Microsoft Windows je možno spustit pouze na 64bitové verzi operačního systému Microsoft Windows. Při výběru aktualizace ovladače zařízení vyberte tu, která je vhodná pro váš operační systém.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
D2DBA12978EFD78B2F6CF9E47BAC762C
SHA1:
Není k dispozici
SHA-256:
Není k dispozici
Formát souboru: ZipPack (externí)
Název souboru: R126743.EXE
Velikost souboru: 250.66 KB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Tento soubor obsahuje komprimovanou (případně komprimovanou do archivu ZIP) sadu souborů. Stáhněte soubor do složky na pevném disku, a poté jej spusťte (poklepejte na něj), rozbalí se sada souborů. Podle pokynů dokončete instalaci.
Chcete-li zajistit integritu stahování, ověřte hodnotu kontrolního součtu.
MD5:
d1aef73ede1e93a0f934e3124ae93474
SHA1:
Není k dispozici
SHA-256:
Není k dispozici
Stažením souhlasíte s podmínkami Licenční smlouvy na software společnosti Dell. (anglicky)
Důležité informace
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Podporované operační systémy
Windows Server 2003
Windows 2000
Pokyny k instalaci
Dell Update Package Instructions for DRVR_WIN_R126743.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R126743.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Install
A. New OS Installation
1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S and providing the driver diskettes for them as prompted.
8. When all devices are specified, continue to the next step by pressing ENTER.
B. Driver Update Installation
Windows XP/Server 2003 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Select "Adaptec Embedded Serial ATA HostRAID Controller" .
4. Select the "Driver" tab.
5. Click on "Update Driver".
6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step.
7. Choose "Install from a list of specific location (Advanced)", and click "Next".
8. Check "Include this location in the search:".
9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next".
10. Click "Finish".
11. If prompted to reboot to complete update, do so.
Windows Server 2000 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Open "Adaptec Embedded Serial ATA HostRAID Controller".
4. Select the "Driver" tab.
5. Click on "Update Driver", then click next at the Driver Wizard welcome screen.
6. Select “Display a list of the known drivers for this device so that I can choose a specific driver”, then click next.
8. Click “Have Disk…”.
9. Enter the locations (hard drive or floppy) where you saved extracted files and click OK.
10. The located driver will be displayed on the, “Select a Device Driver “ page. Select the driver and then click next.
11. Click next on the, “Start Device Driver Installation” page.
12. Click “Finish”.
13. When prompted to restart the computer, click “Yes” to restart immediately (recommended) or click “No” to postpone the restart if necessary.
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R126743.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Install
A. New OS Installation
1. Unzip files to a blank floppy disk --
2. Start installing OS.
3. Press F6 when a message appears requesting you to press F6 if you need to install third party SCSI or RAID drivers.
4. When the Windows Setup window is displayed, Press S to specify additional device(s).
5. Insert the driver diskette and press ENTER.
6. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage devices.
7. If there are any additional devices to be installed, specify them now by pressing S and providing the driver diskettes for them as prompted.
8. When all devices are specified, continue to the next step by pressing ENTER.
B. Driver Update Installation
Windows XP/Server 2003 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Select "Adaptec Embedded Serial ATA HostRAID Controller" .
4. Select the "Driver" tab.
5. Click on "Update Driver".
6. If asked whether to allow Windows to connect to Windows Update, choose "No, not this time" and click "Next". Otherwise, skip to next step.
7. Choose "Install from a list of specific location (Advanced)", and click "Next".
8. Check "Include this location in the search:".
9. Enter the locations (hard drive or floppy) where you saved extracted files and click "Next".
10. Click "Finish".
11. If prompted to reboot to complete update, do so.
Windows Server 2000 Driver Update
1. Open "Device Manager".
2. Open "SCSI and RAID Controllers".
3. Open "Adaptec Embedded Serial ATA HostRAID Controller".
4. Select the "Driver" tab.
5. Click on "Update Driver", then click next at the Driver Wizard welcome screen.
6. Select “Display a list of the known drivers for this device so that I can choose a specific driver”, then click next.
8. Click “Have Disk…”.
9. Enter the locations (hard drive or floppy) where you saved extracted files and click OK.
10. The located driver will be displayed on the, “Select a Device Driver “ page. Select the driver and then click next.
11. Click next on the, “Start Device Driver Installation” page.
12. Click “Finish”.
13. When prompted to restart the computer, click “Yes” to restart immediately (recommended) or click “No” to postpone the restart if necessary.
Known Limitations:
1. If using the CERC SATA 1.5/2s to create 2 single disk volumes, when formatting both disks, Dell strongly advises against attempting to delete one of the disk volumes. This could result in a system lock up and require the user to reboot the system to recover.
Nápověda a instruktáž k ovladačům
Další soubory ke stažení naleznete na adrese Ovladače a soubory ke stažení. Nápovědu k informacím uvedeným na této stránce naleznete na webu Nápověda a instruktáž k ovladačům.