Firmwarový balíček pro 1 100W napájecí zdroj PSU LiteOn (číslo dílu: GYH9V)
Vyžadován restartAUTOMATICKY NAINSTALOVÁNOTento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.
Obsah této stránky byl patrně přeložen automaticky. Chcete-li vložit zpětnou vazbu, vyplňte formulář ve spodní části stránky.
Tento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.
This package provides the new firmware for power supplier and is supported on LiteOn 1100W PSU (PN: GYH9V) running on the Windows and Linux operating systems.
Doporučeno
Vyhledejte nejlepší soubor ke stažení pro svůj systém.
Chcete-li zobrazit nejnovější informace o ovladači pro svůj systém, zadejte podrobnosti produktu.
Vyhledat podporu
Zadejte výrobní číslo Dell nebo model.
Chcete vyhledat svůj produkt? Vložte identifikátor produktu.Ukázat způsob
Nenalezeny žádné výsledky. Pro zadaný výraz nebylo nic nalezeno. Upravte vyhledávaný výraz a hledání opakujte.
Tento ovladač není kompatibilní
Tento ovladač není určen pro vybraný produkt. Vyberte jiný produkt a vložte údaje o produktu pro tento ovladač nebo navštivte stránku podpory produktu a podívejte se na všechny ovladače pro jiný produkt.
Chcete-li používat automatickou kontrolu, přihlaste se do systému Windows jako správce. Pokud jste již přihlášeni jako správce a zobrazí se tato zpráva, restartujte počítač.Váš systém spravuje správce IT – funkce mohou být omezené.
Najděte více aktualizací. Použijte nástroj SupportAssist k vyhledání nejnovějších aktualizací ovladačů.
Společnost Dell Technologies doporučuje tuto aktualizaci zkontrolovat a zjistit, zda je pro váš systém vhodná. Aktualizace obsahuje změny, které mají vliv pouze na určité konfigurace, nebo poskytuje nové funkce, které se mohou nebo nemusí vztahovat k danému prostředí.
Formát souboru:Aktualizační sada pro 32bitový systém MS Windows.
Název souboru:Power_Firmware_N9V70_WN32_07.12.52_A00-01.EXE
Velikost souboru:4.36 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Balíčky Dell Update Package (DUP) ve 32bitovém formátu pro systém Microsoft Windows byly navrženy tak, aby je bylo možno spustit na 64bitové verzi operačního systému Microsoft Windows. Balíčky Dell Update Package (DUP) v 64bitovém formátu pro systém Microsoft Windows je možno spustit pouze na 64bitové verzi operačního systému Microsoft Windows. Při výběru aktualizace ovladače zařízení vyberte tu, která je vhodná pro váš operační systém.
Formát souboru:Soubor GnuPG obsahující kryptografický podpis
Název souboru:Power_Firmware_N9V70_LN32_07.12.52_A00-01.BIN.sign
Velikost souboru:194 Bytes
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Podpis GnuPG pro aktualizační sadu systému Red Hat Linux lze použít k ověření identity společnosti Dell v příslušné aktualizační sadě systému Red Hat Linux.
Formát souboru:Aktualizační sada pro systém Red Hat Linux
Název souboru:Power_Firmware_N9V70_LN32_07.12.52_A00-01.BIN
Velikost souboru:2.17 MB
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Aktualizační sady Dell pro systém Linux lze použít jako samostatné aplikace, které zajišťují splnění určitých kritérií ověření před provedením aktualizace. Poznámka: Aktualizační sady pro systém Linux jsou Open Source. Podrobnosti k aktualizačním sadám Dell pro systém Linux naleznete v souboru ReadMe.
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download 1. Click the Download Now link to download the file. 2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation 1. Read the release information presented by executing the".BIN" file with "--version" command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ".BIN" file from the shell. 4. Follow the remaining prompts to perform the update. 5. Upon successful completion the DUP will prompt to reboot system. 6. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update. 6. Upon successful completion the DUP will prompt to reboot system. 7. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to import once on your system.) 2. Verify the Dell Update Package by using its signature file. 3. Upon successful completion the DUP will prompt to reboot system. 4. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 6. Once the flashing process is complete the system should power back up and boot to OS. IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.