Nástroj pro firmware pevného disku Dell SAS, nástroj pro firmware pevného disku SATA, v.SAS_SATA, A08
AUTOMATICKY NAINSTALOVÁNOTento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.
Obsah této stránky byl patrně přeložen automaticky. Chcete-li vložit zpětnou vazbu, vyplňte formulář ve spodní části stránky.
Tento soubor byl automaticky nainstalován v rámci nedávné aktualizace. Pokud máte jakékoli problémy, můžete jej stáhnout a přeinstalovat ručně.
This is a full compilation of all drives and drive firmware supported under SAS and SATA releases. A drive listed in the Fixes/Enhancements below indicates that it is a new addition to this release. For more details about the other firmware included please download the individual readme file.
Doporučeno
Vyhledejte nejlepší soubor ke stažení pro svůj systém.
Chcete-li zobrazit nejnovější informace o ovladači pro svůj systém, zadejte podrobnosti produktu.
Vyhledat podporu
Zadejte výrobní číslo Dell nebo model.
Chcete vyhledat svůj produkt? Vložte identifikátor produktu.Ukázat způsob
Nenalezeny žádné výsledky. Pro zadaný výraz nebylo nic nalezeno. Upravte vyhledávaný výraz a hledání opakujte.
Tento ovladač není kompatibilní
Tento ovladač není určen pro vybraný produkt. Vyberte jiný produkt a vložte údaje o produktu pro tento ovladač nebo navštivte stránku podpory produktu a podívejte se na všechny ovladače pro jiný produkt.
Chcete-li používat automatickou kontrolu, přihlaste se do systému Windows jako správce. Pokud jste již přihlášeni jako správce a zobrazí se tato zpráva, restartujte počítač.Váš systém spravuje správce IT – funkce mohou být omezené.
Najděte více aktualizací. Použijte nástroj SupportAssist k vyhledání nejnovějších aktualizací ovladačů.
Opravy a vylepšení
This is a general maintenance release for SAS and SATA drives. All former firmware releases for all supported SAS and SATA hard drives have been compiled onto one release. Review the text file for information about fixes supported on this release
The release information in this section is specific to new firmware that has never before been released to the web. New releases added to this utility.
Releases are listed in order of Criticality:
* URGENT Releases *
1.) Seagate SATA 3.5", version MA08 for drive models ST3250310NS, ST3500320NS, ST31000340NS and ST31000340NS. Fixes and Enhancements ====================== Error handling: Drive hang after power cycle resulting in inaccessible data on the drive (refer to Seagate press release for additional detail).
To update drives attached to MD3000 and MD3000i enclosures, use R210446.
Includes several fixes for optimized error handling and stability. Fixes to maintain SMART status error reporting preservation after a power cycle. Hangs detected during video streams during QuickTime application
Performance: Resolved performance degradation issue during heavy sequential write I/O. General performance improvements for reads and for error handling events
2.) This release will update Hitachi 15K SAS 3.5'' 300GB Hard Drives to B590, Drive model HUS154530VLS300 and Hitachi 15K SAS 3.5'' 450GB Hard Drives to D590, Dell part number: XX517, Drive model HUS154545VLS300.
Fixes and Enhancements ====================== New firmware for the Hitachi SAS 3.5" that will help improve stability and overall reliability of these drives. During the next scheduled maintenance window, please update the drive firmware to the latest level, version B590 and D590.
3.) Seagate 15k6 SAS, 3.5" version HS0A for drive models ST3146356SS, ST3300656SS,and ST3450856SS.
Fixes and Enhancements ====================== Error handling: Multiple improvements for handling and recovering from various reset conditions. Fixes for low probability drive timeouts or hang conditions. Fix for offline or SMART trip drives configured in a RAID10. Fix for no drive found error message during a reboot.
Performance: Sequential write performance degraded after writing to a reassigned sector Improvements for sequential read performance under heavy IO Performance Issue When Transitioning From Sequential Writes to Sequential Reads
Dell Part #DescriptionCriticality --------------------------------- XX518HD,146G,SAS,DU,15K,3.5,SGT,HURRecommmended FM501HD,450G,SAS,DU,15K,3.5,SGT,HURRecommended YP778HD,300G,SAS,DU,15K,3.5,SGT,HURRecommended
4.)Seagate NS SAS 3.5", version MS05 for drive models ST31000640SS, ST3750630SS, and ST3500620SS
Fixes and Enhancements ====================== Multiple improvements for handling and recovering from various reset conditions. Fixes for low probability drive timeouts or hang conditions. Fix for offline or SMART trip drives configured in a RAID10. Fix for no drive found error message during a reboot.
Performance: Sequential write performance degraded after writing to a reassigned sector Improvements for sequential read performance under heavy IO Performance Issue When Transitioning From Sequential Writes to Sequential Reads
Dell Part #DescriptionCriticality --------------------------------- CP464HD,1TRB,NL,DU,7.2K,3.5,SGT,MORecommended YP777HD,500G,NL,DU,7.2K,3.5,SGT,MORecommended FM500HD,
Společnost Dell Technologies doporučuje použití této aktualizace při příštím plánovaném cyklu aktualizací. Aktualizace obsahuje změny, které zachovají celý systém v dobrém stavu. Zajišťuje aktuální stav systémového softwaru a kompatibilitu s dalšími moduly systému (firmware, BIOS, ovladače a software) a může obsahovat další nové funkce.
Jde o velký soubor. Stahování může nějakou dobu trvat, v závislosti na rychlosti připojení.
Popis formátu:
Tento soubor obsahuje komprimovanou (případně komprimovanou do archivu ZIP) sadu souborů. Stáhněte soubor do složky na pevném disku, a poté jej spusťte (poklepejte na něj), rozbalí se sada souborů. Podle pokynů dokončete instalaci.
"This release is intended for use on drives attached to SAS/ PERC controllers and MD1000 Enclosures. To update drives attached to MD3000 and MD3000i enclosures, use R210446"
Please note: Only Dell Branded SAS/SCSI and PERC controllers are supported. Embedded SATA controllers are not supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file. The Dell Bios Release Notes window appears.