Dell QDR Network Dual-Port Daughter Mezzanine Adapter Firmware 2.9.1

1.Wrong UAR mapping in pages larger than 4K: Blueflame did not work on UAR pages larger than 4K
2.Congestion Notification Packet may cause HCA to stall under extreme conditions
3.When in unsolicited mode a completion message is not sent on every completion
4.PCIe compatibility issue with a specific PCIe root complex
5.HCA may hang upon CLOSE_PORT command during data stress (ID 91657)
6.Ethernet: Potential packet drops in Pause mode
7.QUERY_DEV_CAP.log_max_bf_regs_per_page fixed from 8 to 3
8.PCIe slow handling of configuration cycles may cause NMI
9.Potential delay in responding to configuration cycles upon data stress
10.High Bit Error Rate on active cables
11.PCI Express compliancy: The ConnectX device may transmit before the PCI Express receiver detect is enabled
12.Slow VPD performance might cause NMI
13.Possible wrong link state during link bring up
14.High Bit Error Rate on active cables
15.Potential delay in responding to configuration cycles upon data stress
16.RoCE issue:Wrong GID in VPI
17.RoCE issue:Missing GUIDs in Ethernet only cards