AUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Windows Server 2003 IA64 Driver for the PERC 4/DC RAID Controller.
Version 6.46.2.64
Empfohlen
Den besten Download für Ihr System suchen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Support suchen
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Bitte ändern Sie Ihre Suche und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
W2K3 6.46.2.64
1. If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
2. During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
3. SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Dell Technologies empfiehlt, dieses Update während Ihres nächsten planmäßigen Updatezyklus durchzuführen. Das Update enthält Änderungen zur Aufrechterhaltung des Gesamtsystemzustands. Es stellt sicher, dass die Systemsoftware aktuell und kompatibel mit anderen Systemmodulen (Firmware, BIOS, Treiber und Software) bleibt und möglicherweise andere neue Funktionen enthält.
Dateiformat:Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname:perc-w2k3-6.46.2.64-A02.exe
Dateigröße:133 KB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Custom Instructions for perc-w2k3-6.46.2.64-A02.exe:
Updating an Existing Windows 2003 Driver ----------------------------------------
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Control Panel > System. The System Properties screen displays. 2. Click on the Hardware tab. 3. Click the Device Manager button and the Device Manager screen displays. 4. Click SCSI and RAID Controllers. 5. Double-click the RAID controller for which you want to update the driver. 6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays. 7. Insert the appropriate driver diskette. 8. Click Next. 9. Follow the steps in the Wizard to search the diskette for the driver. 10. Select the name of the driver, not the INF file. 11. Click Next and continue the installation steps in the Wizard. 12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Refer to the readme file perc-w2k3-6.46.2.64-A02.txt for further driver installation instructions. Custom Instructions for perc-w2k3-6.46.2.64-A02.txt:
Download the readme file (perc-w2k3-6.46.2.64-A02.txt) to view information about this release.