LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, v.199D, A42
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Dell PowerEdge RAID Controller 3/QC, 3/DC, 3/DCL and 3/SC Firmware Update
Version: 199D
Version: 199D
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Fixes: This release is URGENT if 1. applies, otherwise it is RECOMMENDED.
Fixes/Enhancements
1. This fix addresses a potential RAID rebuild issue in case of back to back disk failures.
Læs mereFixes/Enhancements
1. This fix addresses a potential RAID rebuild issue in case of back to back disk failures.
Version
199D, A42
Udgivelsesdato
17 jul. 2007
Downloadtype
Firmware
Kategori
SCSI RAID
Vigtighed
VigtigtDell Technologies anbefaler på det kraftigste, at denne opdatering installeres så hurtigt som muligt. Opdateringen indeholder vigtige fejlrettelser og ændringer med henblik på at forbedre dit Dell-systems funktionalitet, pålidelighed og stabilitet. Den kan også omfatte sikkerhedsrettelser og andre funktionsforbedringer.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: RAID_FRMW_WIN_R151897.EXE
Filstørrelse: 2.36 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
7ACC611BA057C165ADC74B9F50ABD36C
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En eller flere selvudpakkende diskimages i en selvudpakkende zipfil
Filnavn: BR151897.exe
Filstørrelse: 1.16 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og dobbeltklik derefter på den for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
aa31042677a96a904400949e762f7a42
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: RAID_FRMW_LX_R151897.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
74E8DF66F72342466E3305257C1A3399
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Eksterne produktbemærkninger
Filnavn: perc3-FWP3199D-A42.txt
Filstørrelse: 22.42 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
d08b8ccda09b11e82a4e084ba6acf485
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: RAID_FRMW_LX_R151897.BIN
Filstørrelse: 9.44 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
8D7BC3E9AE5D49F7F5BF8F5C3EA7BEB1
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
After installing this firmware and rebooting, a consistency check will automatically begin on RAID 5 and 50 virtual disks with 5 or more physical disks to ensure parity information is correct. The consistency check cannot be terminated and will resume at its last point following a reboot. This consistency check will appear as a Background Initialization but will only perform a consistency check with no data being modified. The consistency check runs in the background, allowing the virtual disks to remain accessible during the check. While this background check is designed to minimize performance impact, some degradation in performance may occur until the check is complete, especially under heavy I/O.
Understøttede operativsystemer
Ikke relevant
Gælder for
�
PERC3/SC
Installationsvejledning
Custom Instructions for BR151897.exe:
This program creates a bootable diskette to upgrade the firmware of the
controllers. You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is
a self extracting executable.
2) Insert a blank diskette into the system's diskette drive.
3) Double click on the file that you downloaded and follow the instructions on
the screen to extract the files to the diskette.
4) Insert the diskette into the system with the RAID controller for which you
want to update the firmware and boot the system.
5) Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code
level and prompt you to reconfirm before starting the firmware upgrade
process.
To perform this process in non-interactive mode please execute,
Pflash /?
and read about possible command line switches.
6) Remove the diskette and reboot the system.
Custom Instructions for perc3-FWP3199D-A42.txt:
Download the readme file to view information about this release.
Instructions for RAID_FRMW_LX_R151897.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./RAID_FRMW_LX_R151897.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./RAID_FRMW_LX_R151897.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for RAID_FRMW_LX_R151897.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, RAID_FRMW_LX_R151897.BIN.sign
Instructions for RAID_FRMW_WIN_R151897.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
This program creates a bootable diskette to upgrade the firmware of the
controllers. You will need a formatted 3 1/2 inch floppy diskette for the
following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is
a self extracting executable.
2) Insert a blank diskette into the system's diskette drive.
3) Double click on the file that you downloaded and follow the instructions on
the screen to extract the files to the diskette.
4) Insert the diskette into the system with the RAID controller for which you
want to update the firmware and boot the system.
5) Follow the instructions on the screen to update the firmware.
NOTICE: Pflash.exe will be executed automatically and will report existing code
level and prompt you to reconfirm before starting the firmware upgrade
process.
To perform this process in non-interactive mode please execute,
Pflash /?
and read about possible command line switches.
6) Remove the diskette and reboot the system.
Custom Instructions for perc3-FWP3199D-A42.txt:
Download the readme file to view information about this release.
Instructions for RAID_FRMW_LX_R151897.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./RAID_FRMW_LX_R151897.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./RAID_FRMW_LX_R151897.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for RAID_FRMW_LX_R151897.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, RAID_FRMW_LX_R151897.BIN.sign
Instructions for RAID_FRMW_WIN_R151897.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.