Seagate BARRACUDA (3.5",SATA,6Gb/s,7200,512) Firmware Update
Genstart er nødvendig AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
This package provides Windows/DOS based firmware update for Seagate ST3160316AS/ST3250312AS/ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS (3.5",SATA,6Gb/s,7200,512) and is supported on Enterprise Servers, Alienware Desktop, XPS Desktop, Inspiron Desktop, Dimension, Powervault, OptiPlex, Cloud Products, Vostro, Precision, and Latitude models that are running the following Windows Operating Systems: XP, VISTA and Windows 7.
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Fixes
-Not Applicable
Enhancements
- Enhanced the boot up detection
- Enhanced the Intel system detection
Læs mere-Not Applicable
Enhancements
- Enhanced the boot up detection
- Enhanced the Intel system detection
Version
JC47, A01
Udgivelsesdato
13 dec. 2011
Downloadtype
Firmware
Kategori
Storage
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Paker filer direkte ud til lokal disk
Filnavn: B765JC47.zip
Filstørrelse: 12.57 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat består af et arkiv med filer, der kan dekomprimeres til en mappe på harddisken. Du kan derefter installere fra den pågældende mappe.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
e9db934e5d5d15f02af1698f69b37614
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
1) Please close other applications before updating.
2) While the firmware is updating, please don't turn off the computer.
2) While the firmware is updating, please don't turn off the computer.
Understøttede operativsystemer
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista 64-bit
Windows XP
Windows XP, 64-bit
Gælder for
Seagate Barracuda ST31000524AS
Seagate Barracuda ST3250312AS
Seagate Barracuda ST3320413AS
Seagate Barracuda ST3500413AS
Seagate ST31000524AS
Seagate ST3250312AS
Seagate ST3320413AS
Seagate ST3500413AS
SWB,ST31000524AS,JC4A
SWB,SWB,SERIAL ATA,R316728
Installationsvejledning
Windows based firmware update for ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Download and unzip B765JC47.zip into your desktop.
2. In B765JC47 folder, please search for the Windows folder.
3. Double click B7032100.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click I agree and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the Begin firmware update procedure, and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.
DOS based firmware update for ST3160316AS/ST3250312AS/ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Unzip B765JC47.zip into your bootable USB key. Boot up the computer with USB key.
2. In Dos folder, just type JC47.BAT at the DOS prompt and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a DRIVE PASSED message. If you already have the correct JC47 firmware on your hard drive, you will get a This drive already has this firmware. DRIVE FAILED TO LOAD the TARGET CODE message.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.
1. Download and unzip B765JC47.zip into your desktop.
2. In B765JC47 folder, please search for the Windows folder.
3. Double click B7032100.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click I agree and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the Begin firmware update procedure, and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.
DOS based firmware update for ST3160316AS/ST3250312AS/ST3320413AS/ST3500413AS/ST3750525AS/ST31000524AS:-
1. Unzip B765JC47.zip into your bootable USB key. Boot up the computer with USB key.
2. In Dos folder, just type JC47.BAT at the DOS prompt and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a DRIVE PASSED message. If you already have the correct JC47 firmware on your hard drive, you will get a This drive already has this firmware. DRIVE FAILED TO LOAD the TARGET CODE message.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.