LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, PERC 4/Di, CERC ATA 100, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, v.6.46.2.32, A05
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Dell PowerEdge RAID Controller 4e/Di, 4e/Si, 4e/DC, 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, PERC 4/Di, PERC 4e/Di, and CERC ATA100/4CH, Device Driver for Windows Server 2003.
Version 6.46.2.32
Version 6.46.2.32
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Fixes:
1. If the Adapter is set to DEAD, all the IOCTLs sent to the driver would be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
2. During Bus Reset, the driver issues a call to the firmware and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the firmware even before the Reset call completed resulting in the Reservation conflict.
Now the driver does not issue the next command until the reset call to the firmware completes.
3. SCSI commands issued to the Dummy Device exposed by the driver were not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Enhancements:
N/A
Læs mere1. If the Adapter is set to DEAD, all the IOCTLs sent to the driver would be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
2. During Bus Reset, the driver issues a call to the firmware and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the firmware even before the Reset call completed resulting in the Reservation conflict.
Now the driver does not issue the next command until the reset call to the firmware completes.
3. SCSI commands issued to the Dummy Device exposed by the driver were not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Enhancements:
N/A
Version
6.46.2.32, A05
Udgivelsesdato
23 sep. 2013
Downloadtype
Driver
Kategori
IDE/EIDE
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: RAID_DRVR_WIN_R99970.EXE
Filstørrelse: 1.13 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
41451665696554870A35CC2BDA98613E
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Paker filer direkte ud til lokal disk
Filnavn: perc-cerc-w2k3-6.46.2.32-A05.exe
Filstørrelse: 75 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat består af et arkiv med filer, der kan dekomprimeres til en mappe på harddisken. Du kan derefter installere fra den pågældende mappe.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Eksterne produktbemærkninger
Filnavn: perc-cerc-w2k3-6.46.2.32-A05.txt
Filstørrelse: 28.32 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Windows Server 2003
Gælder for
�
CERC ATA 100
PERC 4/DC
PERC 4/SC
PERC3/SC
Installationsvejledning
Custom Instructions for perc-cerc-w2k3-6.46.2.32-A05.exe:
This is a self-extracting package of the Windows 2003 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.
To build the installation diskette, execute the package, directing its output to an empty formatted diskette.
Refer to the readme file perc-cerc-w2k3-6.46.2.32-A05.txt for further driver installation instructions.
Updating an Existing Window 2003 Driver
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Control Panel > System. The System Properties screen displays.
2. Click on the Hardware tab.
3. Click the Device Manager and the Device Manager screen displays.
4. Click SCSI and RAID Controllers.
5. Double-click the RAID controller for which you want to update the driver.
6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays.
7. Insert the appropriate driver diskette.
8. Click Next.
9. Follow the steps in the Wizard to search the diskette for the driver.
10. Select the name of the driver.
11. Click Next and continue the installation steps in the Wizard.
12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Custom Instructions for perc-cerc-w2k3-6.46.2.32-A05.txt:
Download the readme file 'perc-cerc-w2k3-6.46.2.32-A05.txt' to view information about this release.
Dell Update Package Instructions for RAID_DRVR_WIN_R99970.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Downloadand install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
This is a self-extracting package of the Windows 2003 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.
To build the installation diskette, execute the package, directing its output to an empty formatted diskette.
Refer to the readme file perc-cerc-w2k3-6.46.2.32-A05.txt for further driver installation instructions.
Updating an Existing Window 2003 Driver
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Control Panel > System. The System Properties screen displays.
2. Click on the Hardware tab.
3. Click the Device Manager and the Device Manager screen displays.
4. Click SCSI and RAID Controllers.
5. Double-click the RAID controller for which you want to update the driver.
6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays.
7. Insert the appropriate driver diskette.
8. Click Next.
9. Follow the steps in the Wizard to search the diskette for the driver.
10. Select the name of the driver.
11. Click Next and continue the installation steps in the Wizard.
12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Custom Instructions for perc-cerc-w2k3-6.46.2.32-A05.txt:
Download the readme file 'perc-cerc-w2k3-6.46.2.32-A05.txt' to view information about this release.
Dell Update Package Instructions for RAID_DRVR_WIN_R99970.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Downloadand install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.