Adaptec 39320A Leadfree Controller, v.2.00.51, A01
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
39320A SCSI RAID 0 or 1 driver build 51
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Initial Release
Læs mereVersion
2.00.51, A01
Udgivelsesdato
01 jul. 2005
Downloadtype
Driver
Kategori
SCSI ikke-RAID
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater
Filformat: ZipPack-ekstern
Filnavn: R101517.EXE
Filstørrelse: 250.45 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En eller flere selvudpakkende diskimages i en selvudpakkende zipfil
Filnavn: BR101517.exe
Filstørrelse: 1.32 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og dobbeltklik derefter på den for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Windows 2000
Windows XP
Gælder for
39320A Leadfree Controller
Installationsvejledning
Custom Instructions for R101517.EXE:
NOTE: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted the message "all files were successfully unzipped" will appear.
5. Click the OK button to exit from the installer.
Installation
Updating the Adaptec Driver from within Windows XP/2000
-------------------------------------------------------------------------
1. From Device Manager right click on the "Adaptec Ultra320 SCSI Adapter" and then choose 'Properties'.
2. Click on the 'Driver' tab, click 'Update Driver' and then click on the 'Next' button.
3. From the next screen click on 'Display a list of the known drivers for this device...' and then the 'Next' button.
4. Click the 'Have Disk' button and type "a:\" in the 'Copy Manufacturer's files from:' drop down menu and choose 'OK'.
5. Choose the "Adaptec HostRAID U320 Driver For Windows 2000/XP/2003" from the list and choose 'Next'. From the next screen choose 'Next' again.
6. Choose 'Finish' to complete the installation and restart system.
Custom Instructions for BR101517.exe:
This is a compressed file. Click the “Extract” button to uncompress the files and create a set of floppy disks. Use the disks to complete the installation.
1.Click “Extract.”
2.In the dialog box, click “Setup.”
3.When an MS-DOS window appears with a message indicating that you need floppy disks, press the [ENTER] key.
4.A message appears prompting you to insert a blank floppy disk. Insert the floppy disk into the floppy disk drive, and press the [ENTER] key.
5.When a message appears indicating that all data on the disk will be erased, press the [y] key and then press the [ENTER] key.
The files are copied to the floppy disk.
6.When the files have been copied to the disk you may be prompted to insert another disk. If prompted, insert a new disk.
7.After all the files have been copied to the floppy disks, press the [ENTER] key and the MS-DOS window closes.
Custom Instructions for BR101517.exe:
NOTE: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted the message "all files were successfully unzipped" will appear.
5. Click the OK button to exit from the installer.
Installation
Updating the Adaptec Driver from within Windows XP/2000
-------------------------------------------------------------------------
1. From Device Manager right click on the "Adaptec Ultra320 SCSI Adapter" and then choose 'Properties'.
2. Click on the 'Driver' tab, click 'Update Driver' and then click on the 'Next' button.
3. From the next screen click on 'Display a list of the known drivers for this device...' and then the 'Next' button.
4. Click the 'Have Disk' button and type "a:\" in the 'Copy Manufacture
NOTE: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted the message "all files were successfully unzipped" will appear.
5. Click the OK button to exit from the installer.
Installation
Updating the Adaptec Driver from within Windows XP/2000
-------------------------------------------------------------------------
1. From Device Manager right click on the "Adaptec Ultra320 SCSI Adapter" and then choose 'Properties'.
2. Click on the 'Driver' tab, click 'Update Driver' and then click on the 'Next' button.
3. From the next screen click on 'Display a list of the known drivers for this device...' and then the 'Next' button.
4. Click the 'Have Disk' button and type "a:\" in the 'Copy Manufacturer's files from:' drop down menu and choose 'OK'.
5. Choose the "Adaptec HostRAID U320 Driver For Windows 2000/XP/2003" from the list and choose 'Next'. From the next screen choose 'Next' again.
6. Choose 'Finish' to complete the installation and restart system.
Custom Instructions for BR101517.exe:
This is a compressed file. Click the “Extract” button to uncompress the files and create a set of floppy disks. Use the disks to complete the installation.
1.Click “Extract.”
2.In the dialog box, click “Setup.”
3.When an MS-DOS window appears with a message indicating that you need floppy disks, press the [ENTER] key.
4.A message appears prompting you to insert a blank floppy disk. Insert the floppy disk into the floppy disk drive, and press the [ENTER] key.
5.When a message appears indicating that all data on the disk will be erased, press the [y] key and then press the [ENTER] key.
The files are copied to the floppy disk.
6.When the files have been copied to the disk you may be prompted to insert another disk. If prompted, insert a new disk.
7.After all the files have been copied to the floppy disks, press the [ENTER] key and the MS-DOS window closes.
Custom Instructions for BR101517.exe:
NOTE: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted the message "all files were successfully unzipped" will appear.
5. Click the OK button to exit from the installer.
Installation
Updating the Adaptec Driver from within Windows XP/2000
-------------------------------------------------------------------------
1. From Device Manager right click on the "Adaptec Ultra320 SCSI Adapter" and then choose 'Properties'.
2. Click on the 'Driver' tab, click 'Update Driver' and then click on the 'Next' button.
3. From the next screen click on 'Display a list of the known drivers for this device...' and then the 'Next' button.
4. Click the 'Have Disk' button and type "a:\" in the 'Copy Manufacture
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.