Samsung P80P Plus 40GB Lead Free PATA HDD, P80P Plus 80GB Lead Free PATA HDD, v.TK300-09, A01
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
For Bootable Diskette:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
1. Click on the (BR139989.EXE) file and select "RUN" then "RUN" again.
2. Choose "Continue" in the next window to create a bootable
floppy.
3. Close all applications, and re-boot from the floppy image just created.
4. The Samsung Sflash utility will start automatically.
5. The utility will only update the models listed above in this release.
6. The application will report "Updated Successfully".
7. Once completed you will be left at an "A:\>".
8. Remove the floppy diskette and power off your system.
9. Restart your system.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
1. Click on the (BR139989.EXE) file and select "RUN" then "RUN" again.
2. Choose "Continue" in the next window to create a bootable
floppy.
3. Close all applications, and re-boot from the floppy image just created.
4. The Samsung Sflash utility will start automatically.
5. The utility will only update the models listed above in this release.
6. The application will report "Updated Successfully".
7. Once completed you will be left at an "A:\>".
8. Remove the floppy diskette and power off your system.
9. Restart your system.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
This update corrects an issue where MS Windows 2000/XP can inadvertently decrease performance due to an internal setting on the hard drive.
Læs mereVersion
TK300-09, A01
Udgivelsesdato
19 jan. 2007
Downloadtype
Firmware
Kategori
IDE/EIDE
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater
Filformat: ZipPack-ekstern
Filnavn: R139989.EXE
Filstørrelse: 258.78 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
3f300ca50f9c80a17d3d42a6fba547bf
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En eller flere selvudpakkende diskimages i en selvudpakkende zipfil
Filnavn: BR139989.exe
Filstørrelse: 1.14 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og dobbeltklik derefter på den for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
c5afdd1ff6f735ab8dcb9cc01a3add92
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Windows 2000
Windows XP
Windows XP, 64-bit
Installationsvejledning
Custom Instructions for R139989.EXE:
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
Floppy Disk Boot to Disk for BR139989.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Alternative Flash process (no floppy available)
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
1. The files contained in (R139989.EXE) should be extracted to bootable media. (ie. Floppy, CD, Zip drive, USB Flash Memory). The default extraction directory is C:\DELL\DRIVERS\R139989.EXE.
2. Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R139989.EXE\FILES directory to bootable source. Boot to that source.
3. The Samsung Sflash utility will start automatically.
4. The utility will only update the models listed above in this release.
5. The application will report "Updated Successfully".
6. Once completed you will be left at a DOS prompt.
7. Remove the bootable media and power off your system.
8. Restart your system.
Floppy Disk Boot to Disk for BR139989.exe
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.