Dell OpenManage Deployment Toolkit, v.2.5, A00
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
The Dell OpenManage Deployment Toolkit (DTK) version 2.5 is a follow-on to the 2.4.1 DTK release. Support for PowerEdge R300 and PowerEdge T300 platforms has been added to this release.
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Support for PowerEdge R300 and PowerEdge T300 platforms has been added to this release.
Læs mereVersion
2.5, A00
Udgivelsesdato
01 apr. 2008
Downloadtype
Hjælpeprogram
Kategori
Systemadministration
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater
Filformat: Et program
Filnavn: DTK2.5-WINPE-80.exe
Filstørrelse: 14.86 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Anvendelse
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
1df2c154efecaa795d28e650e8e1a0d8
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Eksterne produktbemærkninger
Filnavn: DTK_2.5-WINPE-80-README.TXT
Filstørrelse: 15.27 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
e5e4d145a6e36d0596058b512a89592c
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Windows Server 2003
Installationsvejledning
Custom Instructions for DTK_2.5-WINPE-80-README.TXT:
Download
------------
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
--------------
The DTK components are provided in a self-extracting Zip file. The self-extracting file can be opened on any system running a Windows operating system. By default, the files are extracted to the root directory of your local hard drive, C:\. This location can be changed by giving a different path when extracting the files, but it is strongly recommended that you keep the DTK default directory structure if you plan to use the sample deployment scripts provided with the DTK.
Perform the following steps to extract the DTK components to a workstation running Windows:
1. Download the DTK file and save it anywhere on your system.
2. After the file downloads, double-click the file.
3. Click OK.
4. Click Unzip.
By default, files are unzipped to C:\. You can unzip the DTK components to your local hard drive and then copy them later to a network volume, or you can change the installation path to an available network share. For example, you can unzip the files directly to the network share (for example, Z:\) that you plan to use in the deployment process.
The DTK utilities are in Z:\Dell\Toolkit\Tools.
The DTK sample scripts are in Z:\Dell\Toolkit\template\scripts.
The DTK sample configuration files are in Z:\Dell\Toolkit\template\Configs.
The DTK User’s Guide and CLI Reference Guide are in Z:\Dell\Toolkit\Docs.
To use the Deployment Toolkit in a pre-OS environment, you need to create your own WinPE image and install DTK into it. Please refer to the User's Guide for detailed instructions in the chapter "Planning for Deployment for Microsoft® Windows® PE"
Custom Instructions for DTK2.5-WINPE-80.exe:
The DTK_2.5-WINPE-80-README.TXT file contains updated information for your "Dell OpenManage Deployment Toolkit User's Guide" and any other technical documentation included with the Deployment Toolkit (DTK) for Windows PE.
The DTK documentation includes the "Command Line Interface Reference Guide" and the "User's Guide." See the Dell Support website at "support.dell.com" for the most current information.
Download
------------
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
--------------
The DTK components are provided in a self-extracting Zip file. The self-extracting file can be opened on any system running a Windows operating system. By default, the files are extracted to the root directory of your local hard drive, C:\. This location can be changed by giving a different path when extracting the files, but it is strongly recommended that you keep the DTK default directory structure if you plan to use the sample deployment scripts provided with the DTK.
Perform the following steps to extract the DTK components to a workstation running Windows:
1. Download the DTK file and save it anywhere on your system.
2. After the file downloads, double-click the file.
3. Click OK.
4. Click Unzip.
By default, files are unzipped to C:\. You can unzip the DTK components to your local hard drive and then copy them later to a network volume, or you can change the installation path to an available network share. For example, you can unzip the files directly to the network share (for example, Z:\) that you plan to use in the deployment process.
The DTK utilities are in Z:\Dell\Toolkit\Tools.
The DTK sample scripts are in Z:\Dell\Toolkit\template\scripts.
The DTK sample configuration files are in Z:\Dell\Toolkit\template\Configs.
The DTK User’s Guide and CLI Reference Guide are in Z:\Dell\Toolkit\Docs.
To use the Deployment Toolkit in a pre-OS environment, you need to create your own WinPE image and install DTK into it. Please refer to the User's Guide for detailed instructions in the chapter "Planning for Deployment for Microsoft® Windows® PE"
Custom Instructions for DTK2.5-WINPE-80.exe:
The DTK_2.5-WINPE-80-README.TXT file contains updated information for your "Dell OpenManage Deployment Toolkit User's Guide" and any other technical documentation included with the Deployment Toolkit (DTK) for Windows PE.
The DTK documentation includes the "Command Line Interface Reference Guide" and the "User's Guide." See the Dell Support website at "support.dell.com" for the most current information.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.