Seagate ST3750630AS 750GB LF S2 HDD, ST31000340AS 1TB LF S2 HDD, v.DE13, A01
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS
ST31000340AS
ST3750630AS
ST31000340AS
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
The DE13 firmware corrects potential hang on power up. Drive will appear not accessible after hang.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS
ST31000340AS
Læs mereFirmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS
ST31000340AS
Version
DE13, A01
Udgivelsesdato
03 apr. 2009
Downloadtype
Hardware
Kategori
Storage
Vigtighed
KritiskDell Technologies anbefaler på det kraftigste, at denne opdatering installeres så hurtigt som muligt. Opdateringen indeholder vigtige fejlrettelser og ændringer med henblik på at forbedre dit Dell-systems funktionalitet, pålidelighed og stabilitet. Den kan også omfatte sikkerhedsrettelser og andre funktionsforbedringer.
Tilgængelige formater
Filformat: ZipPack-ekstern
Filnavn: R213714.EXE
Filstørrelse: 2.33 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
ead5c107eded39e0fab3cc5b65c1d89f
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En eller flere selvudpakkende diskimages i en selvudpakkende zipfil
Filnavn: BR213714.exe
Filstørrelse: 1.03 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og dobbeltklik derefter på den for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
9f149fc41bb1cfa4c682134286eb67e3
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Windows Vista, 32-bit
MS Windows Vista 64-bit
Windows XP
Windows XP, 64-bit
Gælder for
ST31000340AS 1TB LF S2 HDD
ST3750630AS 750GB LF S2 HDD
Installationsvejledning
Custom Instructions for BR213714.exe:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data.
2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again.
3. Choose "Continue" in the next window to create a bootable
floppy.
4. Close all applications and restart system.
5. Press F12 and insert the floppy disk containing the firmware update.
6. Select boot from Floppy.
7. The Seagate Firmware Update will start automatically.
8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
9. Once completed, a message indicating process completion will appear.
10. Remove the floppy diskette and power off your system.
11. Power on your system to continue normal operation.
Custom Instructions for R213714.EXE:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable CD option
1. Perform a full backup of your data.
2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO".
5. Restart your system.
6. Press F12 and insert the CD containing the firmware update.
7. Select boot from CD/DVD.
8. The Seagate utility will start automatically.
9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
10. Once completed, a message indicating process completion will appear.
11. Remove the CD and power off your PC.
12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data.
2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. The files are located in "C:\DELL\Drivers\R213714\Files" directory.
5. Add the files to your bootable USB key.
6. Restart your system.
7. Insert your USB key containing the firmware update.
8. Press F12 and choose boot from USB
9. The Seagate utility will start automatically.
10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
11. Once completed, a message indicating process completion will appear.
12. Remove the Bootable Media and power off your system.
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data.
2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again.
3. Choose "Continue" in the next window to create a bootable
floppy.
4. Close all applications and restart system.
5. Press F12 and insert the floppy disk containing the firmware update.
6. Select boot from Floppy.
7. The Seagate Firmware Update will start automatically.
8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
9. Once completed, a message indicating process completion will appear.
10. Remove the floppy diskette and power off your system.
11. Power on your system to continue normal operation.
Custom Instructions for R213714.EXE:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable CD option
1. Perform a full backup of your data.
2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO".
5. Restart your system.
6. Press F12 and insert the CD containing the firmware update.
7. Select boot from CD/DVD.
8. The Seagate utility will start automatically.
9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
10. Once completed, a message indicating process completion will appear.
11. Remove the CD and power off your PC.
12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data.
2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again.
3. Press "Continue" then "OK" to extract the files to the provided location.
4. The files are located in "C:\DELL\Drivers\R213714\Files" directory.
5. Add the files to your bootable USB key.
6. Restart your system.
7. Insert your USB key containing the firmware update.
8. Press F12 and choose boot from USB
9. The Seagate utility will start automatically.
10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS.
11. Once completed, a message indicating process completion will appear.
12. Remove the Bootable Media and power off your system.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.