Western Digital WD2500AALX/WD3200AALX/WD5000AALX/WD10EALX 3.5 7200 RPM SATA3.0 Firmware Update

AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
This package provides the Western Digital WD2500AALX 250GB/WD3200AALX 320GB/WD5000AALX 500GB/WD10EALX 1TB 3.5 7200 RPM SATA3.0 Firmware Update and is supported on Vostro Desktop, XPS Desktop, Inspiron Desktop, Precision, Alienware Desktop and Optiplex models that are running the following Operating Systems: XP, Vista, Windows 7, Linux and Ubuntu.
Anbefalet

Find den bedste download til dit system

Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit system

Søg i support

Indtast din Dell-servicekode eller -model

Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan

Denne driver er ikke kompatibel

Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.

Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.

Programrettelser og forbedringer

Initial Release.
Læs mere

Version

19.01H19, A00

Udgivelsesdato

07 sep. 2011

Downloadtype

Hardware

Kategori

Storage

Vigtighed

Anbefalet
Dell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater

Filformat: ZipPack-ekstern
Filnavn: R313263.exe
Filstørrelse: 1.35 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig

Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)

Yderligere oplysninger

Vis alle | Skjul alle
Red Hat® Linux 9.0
Ubuntu® Desktop 7.04
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista 64-bit
Windows XP
Windows XP Embedded
Windows XP, 64-bit
Hard Drive Installation (via WinZip) of DOS Utility for R313263.exe Download 1.Click the location, e.g. Americas, from which you want to download the file. 2.When the File Download window appears, click Save this program to disk and click OK. The Save In window appears. 3.From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop. 4.If a Download Complete window appears, click Close. A new icon appears on your desktop. Install 1. Double-click the new icon on the desktop labelled R313263.exe. 2. The Self-Extractor window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R313263.If you did not print these instructions, write down this path. The WinZip Self-Extractor window appears. 3. Click OK. 4. If the Self-Extractor window is still open, close it. 5. Create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 – "What can I use for a boot disk with CD-ROM support?"6. Insert the floppy disk into the floppy drive and reboot the computer. 7. At the A:/> prompt, type C: and then press the [ENTER] key. 8. Type C:\DELL\DRIVERS\R313263 and then press [ENTER]. 9. Follow the on-screen instructions. Installation 1. Extract .zip file to a known path. 2. Copy "WD.bat" and "WD4082.exe" to root directory of a bootable USB key. 3. Boot from USB key and ensure drive path includes WD.bat and WD4082.exe. 4. Type "WD" and hit "Enter". 5. Firmware update will provide messaging indicating successful update. Note: Update checks current firmware version and will not run on identical version.

Hjælp og selvstudier til drivere