AUTOMATISK INSTALLERETDenne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
====================================================================== Contents ====================================================================== 1. Files included in this package 2. Fixes / Enhancements 3. Important Information 4. Firmware upgrade instructions 5. MD1000 Firmware upgrade instructions
====================================================================== 1. Files included in this package ====================================================================== Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp : Duplex NVSRAM for MD3000i configured with two controllers Single_Controller_MD3000i_N1532-735890-905.dlp : Simplex NVSRAM for MD3000i configured with a single controller MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware MD1000_A04.bin: MD1000 Firmware
====================================================================== 2. Fixes / Enhancements ====================================================================== 07.35.39.64 ----------- * Added fix to resolve controller reboot due to insertion of foreign physical disk * Improved scheduled I/O timing * Improved controller memory utilization * Added fix to resolve the controller panic issue caused by memory leak * Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time * Added support for Windows Server 2008 R2 SP1
07.35.38.60 -----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays - This support is only for OSes common to both the MD3000 and MD3200 Series arrays - This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems - SLES 10 SP3 - SLES 11 - SLES 11 SP 1 - RHEL 5 SP 4 - RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware Owner's Manual for removal and installation instructions.
====================================================================== 3. Important Information ====================================================================== NOTICE: Prior generation firmware is indicated by version that begins with 06.xx.xx.xx, and the Generation 2 firmware starts with 07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2 firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version, the upgrade is one way only; it is not possible to return to prior generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures being connected to the MD3000i are updated to the latest Dell PowerVault MD1000 EMM Firmware from support.dell.com. Dell PowerVault MD1000 EMM Firmware version A03 is the minimum required firmware level to support connection to the MD3000i array; attaching an MD1000 with unsupported firmware causes an uncertified condition to exist on the array. See the updated Hardware Owner''''s Manual on http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on support.dell.com prior to connecting MD1000 enclosures to an MD3000i to ensure supported drives and firmware versions are used.
====================================================================== 4. Firmware upgrade instructions ====================================================================== IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved thro
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit system
Søg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id.Vis mig hvordan
Søgningen gav ingen resultater.Vi kunne ikke finde nogen match til din søgning. Rediger din søgning, og prøv igen.
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden.Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
07.35.39.64 ----------- * Added fix to resolve controller reboot due to insertion of foreign physical disk * Improved scheduled I/O timing * Improved controller memory utilization * Added fix to resolve the controller panic issue caused by memory leak * Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time * Added support for Windows Server 2008 R2 SP1
07.35.38.60 ----------- Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays - This support is only for OSes common to both the MD3000 and MD3200 Series arrays - This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems - SLES 10 SP3 - SLES 11 - SLES 11 SP 1 - RHEL 5 SP 4 - RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware Owner''s Manual for removal and installation instructions.
Dell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.