Dell PowerApp.BIG-IP Version 4.x (ENCRYPTED) Updates, v. 4.2 PTF5 Encrypted, 4.2PTF5
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
These are the directions on how to get the update(PTF 5) for Encrypted BIG-IP Version 4.2 (also called PowerApp.BIG-IP 220). PTF5 provides a number of bug fixes, and is cumulative from all previous PTFs.
For the exact description of fixes provided, please see the Fixes/Enhancement section.
For the exact description of fixes provided, please see the Fixes/Enhancement section.
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
What's new in this PTF (PTF-05)
Support for the Dell PowerEdge 2650 platform
This release includes support for the Dell PowerEdge 2650 platform.
What's new from PTF-04
MAC addresses for VLANs on IP Application Switch (CR15611)
On the IP Application switch, VLANs may now use the first member interface's MAC address as the MAC address for the BIG-IP on that VLAN. This duplicates the functionality on the server appliance.
Status lights (CR18605)
In an active-active configuration the annunciator lights now show the correct status (active or standby) on each unit.
VLAN headers for tagged interfaces (CR18623)
The BIG-IP no longer inserts random QoS values into 802.1Q VLAN headers.
Extra characters in log file (CR18879)
When UDP port * is enabled and UDP timeout is set to 0 (zero), extra characters are no longer entered in the log file.
RADIUS_pinger (CR19271)
The RADIUS_pinger no longer intermittently marks nodes down.
Dell 2650 ESM-4 support (CR19325) (CR20100) (CR21178) (CR21179) (CR21183) (CR21208) (CR21221) (CR21222)
The BIG-IP now supports the Dell 2650 platform.
bigip.conf file (CR19361)
A large bigip.conf file now loads more quickly when aliasing is used for node monitors.
IMAP_pinger default folder (CR20043)
If you do not specify an IMAP_pinger folder when defining a monitor based on the IMAP_monitor, the default folder "INBOX" will be used.
SNMP with wildcard virtual servers (CR20125)
The snmpwalk command now returns the correct values for virtual servers when a wildcard virtual server is defined.
Support for iControl v2.1 (CR20178)
This version supports iControl v2.1.
Apache+Mod_SSL on BIG-IP has a buffer overflow (CR20196)
We have addressed security issues regarding an Apache+Mod_SSL buffer overflow. For more information see http://archives.neohapsis.com/archives/bugtraq/2002-02/0313.html.
Windows Terminal Server (WTS) persistence (CR20241)
This release includes an updated version of the BIG-IP Windows Terminal Server (WTS) persistence feature. WTS persistence provides an efficient way of load balancing traffic to and maintaining persistent connections between Windows clients and servers that are running Microsoft's Terminal Services service. When BIG-IP WTS persistence is enabled, a Windows .NET Enterprise server participating in session sharing can redirect a mis-targeted connection to the BIG-IP virtual server, instead of to another server directly. This ability to redirect connections to the BIG-IP allows the BIG-IP to assume responsibility for redirecting connections to the appropriate servers when necessary. Also, when WTS persistence is enabled on a BIG-IP and the servers in the pool participate in session sharing, the BIG-IP load balances a Terminal Services connection according to the way that the user has configured the BIG-IP for load balancing. Thus, the use of Windows .NET Enterprise servers and session sharing, combined with the BIG-IP WTS persistence feature, provides more sophisticated load balancing and more reliable reconnection when servers become disconnected. For more information about this feature, see the technical note Configuring BIG-IP Windows Terminal Server Persistence.
big3d and TCP (CR20244)
TCP now functions properly with big3d on the IP Application Switch.
Obsolete VLAN commands (CR20254)
Using obsolete VLAN commands no longer causes errors when loading.
Default TCP timeout for SNATs (CR20270)
Loading a SNAT with a default TCP timeout no longer cause errors.
Active FTP port collision resolution (CR20417)
Active FTP port collision resolution through a SNAT now functions correctly.
Unsuccessful login reporting for SSH, RSH, RCP, and FTP (CR20435)
Previously the BIG-IP recorded unsuccessful login attempts for Telnet only. The /var/log/secure file now shows unsuccessful login attempts for SSH, RSH ,RCP, and FTP.
Setting port 0 timeout (CR20469)
You can now set the port 0 timeout without causing SNAT c
Læs mereSupport for the Dell PowerEdge 2650 platform
This release includes support for the Dell PowerEdge 2650 platform.
What's new from PTF-04
MAC addresses for VLANs on IP Application Switch (CR15611)
On the IP Application switch, VLANs may now use the first member interface's MAC address as the MAC address for the BIG-IP on that VLAN. This duplicates the functionality on the server appliance.
Status lights (CR18605)
In an active-active configuration the annunciator lights now show the correct status (active or standby) on each unit.
VLAN headers for tagged interfaces (CR18623)
The BIG-IP no longer inserts random QoS values into 802.1Q VLAN headers.
Extra characters in log file (CR18879)
When UDP port * is enabled and UDP timeout is set to 0 (zero), extra characters are no longer entered in the log file.
RADIUS_pinger (CR19271)
The RADIUS_pinger no longer intermittently marks nodes down.
Dell 2650 ESM-4 support (CR19325) (CR20100) (CR21178) (CR21179) (CR21183) (CR21208) (CR21221) (CR21222)
The BIG-IP now supports the Dell 2650 platform.
bigip.conf file (CR19361)
A large bigip.conf file now loads more quickly when aliasing is used for node monitors.
IMAP_pinger default folder (CR20043)
If you do not specify an IMAP_pinger folder when defining a monitor based on the IMAP_monitor, the default folder "INBOX" will be used.
SNMP with wildcard virtual servers (CR20125)
The snmpwalk command now returns the correct values for virtual servers when a wildcard virtual server is defined.
Support for iControl v2.1 (CR20178)
This version supports iControl v2.1.
Apache+Mod_SSL on BIG-IP has a buffer overflow (CR20196)
We have addressed security issues regarding an Apache+Mod_SSL buffer overflow. For more information see http://archives.neohapsis.com/archives/bugtraq/2002-02/0313.html.
Windows Terminal Server (WTS) persistence (CR20241)
This release includes an updated version of the BIG-IP Windows Terminal Server (WTS) persistence feature. WTS persistence provides an efficient way of load balancing traffic to and maintaining persistent connections between Windows clients and servers that are running Microsoft's Terminal Services service. When BIG-IP WTS persistence is enabled, a Windows .NET Enterprise server participating in session sharing can redirect a mis-targeted connection to the BIG-IP virtual server, instead of to another server directly. This ability to redirect connections to the BIG-IP allows the BIG-IP to assume responsibility for redirecting connections to the appropriate servers when necessary. Also, when WTS persistence is enabled on a BIG-IP and the servers in the pool participate in session sharing, the BIG-IP load balances a Terminal Services connection according to the way that the user has configured the BIG-IP for load balancing. Thus, the use of Windows .NET Enterprise servers and session sharing, combined with the BIG-IP WTS persistence feature, provides more sophisticated load balancing and more reliable reconnection when servers become disconnected. For more information about this feature, see the technical note Configuring BIG-IP Windows Terminal Server Persistence.
big3d and TCP (CR20244)
TCP now functions properly with big3d on the IP Application Switch.
Obsolete VLAN commands (CR20254)
Using obsolete VLAN commands no longer causes errors when loading.
Default TCP timeout for SNATs (CR20270)
Loading a SNAT with a default TCP timeout no longer cause errors.
Active FTP port collision resolution (CR20417)
Active FTP port collision resolution through a SNAT now functions correctly.
Unsuccessful login reporting for SSH, RSH, RCP, and FTP (CR20435)
Previously the BIG-IP recorded unsuccessful login attempts for Telnet only. The /var/log/secure file now shows unsuccessful login attempts for SSH, RSH ,RCP, and FTP.
Setting port 0 timeout (CR20469)
You can now set the port 0 timeout without causing SNAT c
Version
4.2 PTF5 Encrypted, 4.2PTF5
Udgivelsesdato
28 maj 2002
Downloadtype
Patch/opgradering
Kategori
Program
Vigtighed
ValgfritDell Technologies anbefaler at gennemse denne opdatering for at afgøre, om den er relevant for dit system. Opdateringen indeholder ændringer, der kun har indflydelse på visse konfigurationer, eller tilvejebringer nye funktioner, der muligvis passer til dit miljø.
Tilgængelige formater
Filformat: ZipPack-ekstern
Filnavn: R43692.EXE
Filstørrelse: 137.27 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Ikke relevant
Installationsvejledning
After downloading the directions for obtaining the update for the BIG-IP version 4.2 PTF 5, (also known as PowerApp.BIG-IP 220) double click the file to unzip it to a folder of your choice. This will unzip the directions on how to proceed to get the actual software update.
The actual instructions on how to install the software will be provided when you recieve the software.
The actual instructions on how to install the software will be provided when you recieve the software.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.