Adaptec 39160 SCSI - Family Manager Set, v.FMS4.0 SP5, A11
AUTOMATISK INSTALLERETDenne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Adaptec 39160/7892/7899 SCSI Controller Driver Set
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit system
Søg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id.Vis mig hvordan
Søgningen gav ingen resultater.Vi kunne ikke finde nogen match til din søgning. Rediger din søgning, og prøv igen.
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden.Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
This driver merges the previous Dell 'Special' code stream and the Adaptec 'Service Pack' code stream - as of this release Dell A11 = Adaptec FMS 4.0 SP5.
S1 - S5: this is a change list/history applicable to the Dell code stream, and is applicable to Windows 2000 only:
S1: Based on Cyrax standard release, added fix for Non-Tag Target Timeout.
S2: Based on S1, added fix for Slow tape performance.
S3: Based on Cyrax standard release, added fix for Slow tape performance.
S4: Based on S2, added fix for Request Sense Timeout in Non-tag code path.
S5: Based on S3
· Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in Windows 2000 Event log when using Tape Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
· Added fix for Request Sense Timeout in Non-tag code path.
· Command timeout when installing Dell management Software under Windows 2000.
SP1 - SP4: this is a change list/history applicable to the Adaptec Service Pack code stream, and only covers changes made to Windows 2000 or Windows 2003 drivers:
Service Pack 1 Windows 2000: · Fixed Issue: The termination setting for channel B on the AIC-7899 was being set incorrectly. The problem is seen only on motherboards in which the AIC-7899 has been designed to control the termination for channel A and Motherboards that do not use the AIC-7899 to control the termination of the bus will not see this problem. Adaptec host adapters do not exhibit this problem either.
Service Pack 2 Netware fixes only; no Windows 2000 or 2003 changes.
Service Pack 3 Windows 2000: · Fixed Issue: With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer rate, all subsequent IO transfers occurred as Async.
· Tape IO Test certification failure fix.
Service Pack 4 Windows 2000: · Clustering certification
· With non-disk device such as HP Ultrium Tape drive, the driver did not negotiate transfer rate, all subsequent I/O transfers occurred as asynchronous speeds.
· Command timeout with Event 9 errors logged in win2k Event log when using Tape Library.
· Fix for Fast or Multi SCSI ID Tape Library Timeout
Dell Technologies anbefaler at gennemse denne opdatering for at afgøre, om den er relevant for dit system. Opdateringen indeholder ændringer, der kun har indflydelse på visse konfigurationer, eller tilvejebringer nye funktioner, der muligvis passer til dit miljø.
Download 1. Click Download Now, to download the file. 2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement. 3. When the File Download window appears, click Save and click OK. The Save In: window appears. 4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Diskette Creation 1. Insert a floppy diskette into the floppy drive. 2. Double-click the new icon on the desktop. The Self-Extractor window appears. 3. Specify the floppy drive as the location to upzip the files. 4. Click on the unzip button to extract files.
IMPORTANT NOTE: If you are running Open Manage Array Manager v3.2 or higher under Windows 2000, to avoid a potential Blue Screen, prior to updating the driver you will need to: 1. Disable the SCSI subsystem provider in the Array Manager Utilities before upgrading the driver. Please refer to the Array Manager documentation for details on how to do this. 2. Once the SCSI provider is disabled, you should then navigate to the \WINNT\SYSTEM32\DRIVERS folder and temporarily rename ASPI32.SYS to ASPI32.XXX, then reboot the system before proceeding with the upgrade. 3. Following the upgrade, you will need to reboot again before re- naming ASPI32.SYS back to its' original name, then finally re-enabling the SCSI provider.
Updating the driver on an Existing Windows 2000/2003 Server
NOTE: You must be logged on as Administrator to perform these steps:
1. From the desktop, right-click the My Computer icon. 2. Left-click Manage. 3. Click Device Manage. 4. Double-click SCSI and RAID Controllers. A List of all currently installed SCSI devices appears. 5. Double-click the appropriate SCSI controller (such as 39160 Controller) - in the case of a dual channel controller, there will be two devices listed (one for each channel). The driver will have to be updated separately for each channel. 6. Select the Driver tab. 7. Select Update Driver. The Update Device Driver Wizard appears. 8. Click Next. 9. Click 'Display a list of known drivers for this device so I can choose a specific driver' 10. Click Next. The Upgrade Device Driver Wizard appears. 11. Click 'Have Disk' button. The 'Install from Disk' dialog appears. 11. Insert the driver diskette created above. 12. Click 'Browse' button Locate File dialog appears 13. Use pull-down box to find floppy drive 14. Double-click on appropriate (WIN2000 or WIN2003) folder ADPU160M.INF should appear in 'File Name' box - if not, select it 15. Click 'Open' button 'Install From Disk' dialog reappears with correct path displayed 16. Click 'OK' Upgrade Device Driver Wizard reappears. 17. Choose appropriate device from list (7892, 7899 or 39160) 18. Click 'Next' 19. Click 'Next' again to confirm choice and upgrade driver 20. Close Wizard by clicking Finish 21. Close Properties Dialog for device. 22. Do not reboot system yet. 23. Repeat steps 5-22 for second channel after Device Manager refreshes. 24. Reboot System to complete upgrade.