Seagate SAS ST3500620SS, ST3750630SS and ST31000640SS firmware version MS0C.
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
This release contains firmware version MS0C for Seagate SAS (7.2K rpm 3.5" SAS) 500GB, 750GB and 1TB Hard Drives. Dell Part numbers YP777, FM500 and CP464. Vendor model numbers ST3500620SS, ST3750630SS and ST31000640SS.
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Fixes / Enhancements:
Resolved issue that cause poor read performance under high temperatures
Resolve a rare condition that could cause an incorrect check condition when ECC error is reported
Improved drive error handling
Optimized drive seek algorithms
Læs mereResolved issue that cause poor read performance under high temperatures
Resolve a rare condition that could cause an incorrect check condition when ECC error is reported
Improved drive error handling
Optimized drive seek algorithms
Version
MS0C, A06
Udgivelsesdato
25 apr. 2012
Downloadtype
Firmware
Kategori
SAS-drev
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: SAS-Drive_Firmware_WPV4X_WN32_MS0C_A06.EXE
Filstørrelse: 11.11 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
a9c48a3dab15cb5025e5f7d496f1e3d4
SHA1:
4bc4ffc5932219071a9b0ab23a678d244ffdc7b1
SHA-256:
7524e0842037a0d7ceb6d6d188da1f5fbc4b1761f6a99b1499bbd7cd0303280b
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: SAS-Drive_Firmware_WPV4X_LN32_MS0C_A06.BIN.sign
Filstørrelse: 189 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
f22302796d7f1942ad433a64beed3f85
SHA1:
77d4592f60d57a30b4534345d6e74e8d4d676bf4
SHA-256:
4dd7aee1c6fb913500fe3c7330d83ae6cd94789f6997cf4e80eaed7b58f9680c
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: SAS-Drive_Firmware_WPV4X_LN32_MS0C_A06.BIN
Filstørrelse: 9.84 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
4d45585b8aba74b19c33c7ec806775e4
SHA1:
28585d6531acdf4b5165a1f78abb04aadcf56f6f
SHA-256:
72ff3ee9b72df9c77fcb699ec00498d5d46d1d3c868196f60a80cb2c108e62a2
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Understøttede operativsystemer
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.7
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Gælder for
3.5, 7.2K, NL, SAS, 1TB, DU
3.5, 7.2K, NL, SAS, 500GB, DU
3.5, 7.2K, NL, SAS, 750GB, DU
Installationsvejledning
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.