Dell BMC Firmware, v.2.50, A00
Genstart er nødvendig AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Critical Security Update --Dell BMC Firmware, v.2.50, A00
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Critical Security Update --Urgent BMC Release
Læs mereVersion
2.50, A00
Udgivelsesdato
15 okt. 2012
Downloadtype
Firmware
Kategori
Embedded Server Management
Vigtighed
VigtigtDell Technologies anbefaler på det kraftigste, at denne opdatering installeres så hurtigt som muligt. Opdateringen indeholder vigtige fejlrettelser og ændringer med henblik på at forbedre dit Dell-systems funktionalitet, pålidelighed og stabilitet. Den kan også omfatte sikkerhedsrettelser og andre funktionsforbedringer.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: 1950_ESM_Firmware_XCVN0_WN32_2.50_A00.EXE
Filstørrelse: 4.68 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
374c607b9d0375c53a259e80014fd8c7
SHA1:
052d8aaf0d60cfc9cc08b14057a46b9d9de86099
SHA-256:
3e2c7e98064a53dbfcd48030afda2edf48bed75c3af44f5273e9dbc47e84bcd5
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: 1950_ESM_Firmware_XCVN0_LN32_2.50_A00.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
8e01e56b525fc1d1194d69ee10a3bf4b
SHA1:
c10f47856f81be9562a60b3638c887791a6ed1a7
SHA-256:
6e4e473ac8f2a277f5f8681c0df9d47d68d257f33ee66ab0b0b34bacb834e7e1
Filformat: Eksterne produktbemærkninger
Filnavn: BMC_2.50_A00_README.txt
Filstørrelse: 3.52 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
c4f49b2f0e4e242b6c00ec8d80c0ad1a
SHA1:
858b59ae8643bd5df856381fd2ee2ab63764bdf0
SHA-256:
1703995e60d29836d6a98a87ef507c851d98de2b8d171e7d45adf08363385363
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: 1950_ESM_Firmware_XCVN0_LN32_2.50_A00.BIN
Filstørrelse: 2.61 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
c646b08c8ab254958fd9a8bdd2304dfc
SHA1:
7994b6f6200978990b523a6f81f2b0a73443502e
SHA-256:
eb4de20bb4fc5294c99abb9a6febf18e2bb8ae8c8e6d307da725ad048ccaabcb
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
###############################################################
Important Information for Update Packages for Microsoft Windows
###############################################################
* Do not run other applications while executing Dell Update Packages.
* When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
* When upgrading theBMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source "IPMIDRV" with Event ID 1004 are logged in the System Log in the Event Viewer console.
These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
###################################################
Important Information for Update Packages for Linux
###################################################
* Do not run other applications while executing Dell Update Packages.
* If the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"
* Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at "support.dell.com".
Important Information for Update Packages for Microsoft Windows
###############################################################
* Do not run other applications while executing Dell Update Packages.
* When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
* When upgrading theBMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source "IPMIDRV" with Event ID 1004 are logged in the System Log in the Event Viewer console.
These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
###################################################
Important Information for Update Packages for Linux
###################################################
* Do not run other applications while executing Dell Update Packages.
* If the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"
* Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at "support.dell.com".
Understøttede operativsystemer
Ikke relevant
Gælder for
BMC Firmware
Installationsvejledning
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.