Dell PERC 5/i Adapter, v.5.2.1-0066, A07
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Dell PowerEdge RAID Controller 5/i Adapter Firmware release
Package Version: 5.2.1-0066
Package Version: 5.2.1-0066
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Package Version - 5.2.1-0066
Firmware Version - 1.03.40-0316
SASBIOS Version - MT28-8
Ctrl-R Version - 1.04-019A
MPT - 00.10.47.00-IT
Please see release notes for detailed list of fixes/enhancements.
Læs mereFirmware Version - 1.03.40-0316
SASBIOS Version - MT28-8
Ctrl-R Version - 1.04-019A
MPT - 00.10.47.00-IT
Please see release notes for detailed list of fixes/enhancements.
Version
5.2.1-0066, A07
Udgivelsesdato
23 nov. 2007
Downloadtype
Firmware
Kategori
SAS RAID
Vigtighed
AnbefaletDell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: FRMW_WIN_R168188.EXE
Filstørrelse: 2.64 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
634DE3F2A247564C60EE09BC54AEF784
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En eller flere selvudpakkende diskimages i en selvudpakkende zipfil
Filnavn: BR168188.exe
Filstørrelse: 1.53 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og dobbeltklik derefter på den for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
1fa75ad3ae293b6f7376774f0a8605e4
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: FRMW_LX_R168188.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
A6D1FC4AE5C3D9C1C430FC8721456D18
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: ZipPack-ekstern
Filnavn: R168188.EXE
Filstørrelse: 1.34 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Denne fil indeholder komprimerede (eller ZIP) filer. Hent filen til en mappe på din harddisk, og kør den derefter (dobbeltklik) for at udpakke filerne. Følg instruktionerne for at fuldføre installationen.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Eksterne produktbemærkninger
Filnavn: R168188.txt
Filstørrelse: 14.26 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat indeholder almindelig tekst, som kan vises med en standardteksteditor.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
f5140c1d0a6f32ed11f517ca030590be
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: FRMW_LX_R168188.BIN
Filstørrelse: 2.26 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
4F2888CC1070FB64DC87F45EC6E56048
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Vigtige oplysninger
1. When viewing SATA physical disk properties from Ctrl-R or other management
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
applications, the Vendor Identification will be translated as "ATA".
2. If all physical disks making up a virtual disk are removed from the system or
enclosure, the RAID controller will delete the virtual disk. If the disks are
later re-inserted, they will be marked foreign and can be imported using a
management application.
3. If the cable connecting a PERC 5/E to an enclosure is removed, the RAID
controller will immediately delete all virtual disks on that enclosure. To
recover, power down the server and ensure all cables in the configuration are
securely connected. When the server is powered on, the RAID controller will
detect the disks as foreign and the configuration can be imported with a
management application.
4. Physical disks determined to contain a foreign configuration are not
available for configuration as a new dedicated or global hotspare, or as a
member of a new virtual disk. The foreign configuration must be imported or
cleared from the physical disk before it may be used as a hotspare or member
of a virtual disk. Physical disks with a foreign configuration will not appear
on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration, the source system must be
powered off before removal of the physical disks to preserve the correct
virtual disk state. This is not required for the target system and the
physical disks may be inserted while the system is powered on or off.
6. This version of firmware will not ensure complete compatibility with an
older version of the management application, OpenManage 5.0 or 5.1.
OpenManage 5.2 or greater is recommended.
7. It is recommended that the customer upgrade the management application
and device driver to the latest version available from Dell at the time of
installation of this firmware.
8. The firmware restricts the importing of virtual disks that are undergoing
RAID level migration or Capacity Expansion. Do not interrupt virtual disks
that are performing either of these operations because it will disable the
ability to import the virtual disk and the data will be unavailable. Dell
recommends that the user perform a data backup before starting these operations.
9. Foreign dedicated hot spares are now imported as global hot spares.
10. Default Physical disk cache settings for hard drives are ON for SATA drives
and OFF for SAS drives.
11. A EMM change or a drive migration is not a supported action during a
Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline.
Dell recommends the user to take a data backup before starting these operations.
12. A Rebuild operation cannot be stopped/interrupted from the Ctrl+R configuration utility
but can be done from the Dell Open Manage Storage Management Software.
Understøttede operativsystemer
Ikke relevant
Installationsvejledning
Custom Instructions for BR168188.exe:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
Dell Update Package Instructions for FRMW_LX_R168188.BIN:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./FRMW_LX_R168188.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./FRMW_LX_R168188.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R168188.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R168188.BIN.sign
Dell Update Package Instructions for FRMW_WIN_R168188.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R168188.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Instructions for R168188.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click the 'Continue' button on the self-extractor window after inserting
one of the formatted floppies.
4. The utility prompts the user to insert the second floppy diskette after
it completes writing on the first floppy.
5. Remove the first floppy and insert the second floppy diskette.
6. Press 'Continue' button.
7. After all the files have been copied to the last floppy disk, press the 'Finish'
Dell Update Package Instructions for FRMW_LX_R168188.BIN:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./FRMW_LX_R168188.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./FRMW_LX_R168188.BIN" from the shell.
5. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R168188.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_R168188.BIN.sign
Dell Update Package Instructions for FRMW_WIN_R168188.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Instructions for R168188.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Instructions for R168188.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.