Dell EMC OpenManage Plug-in Version 3.0 for Nagios XI
AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Dell EMC OpenManage Plug-in Version 3.0 for Nagios XI provides capabilities for Out-of-Band (Agent-Free) management of 12th and later generations of PowerEdge Servers, Modular Infrastructure, Hyper-Converged Infrastructure (HCI), Datacenter Scalable Solutions (DSS), Storage and Networking devices. This plug-in provides complete hardware-level visibility including detailed inventory, health status (both overall and component-level health status) and SNMP trap monitoring for supported devices. Dell EMC PowerEdge Servers, DSS and HCI are monitored using a combination of Redfish based RESTful APIs, WSMan APIs and/or SNMP provided by iDRAC with Lifecycle Controller. In addition, out-of-band monitoring of Dell EMC Modular Infrastructure is supported using the WSMan APIs and SNMP provided by Chassis Management Controller (CMC), whereas Dell EMC Storage and Networking devices are monitored using the SNMP only. One-to-One web console launch of the respective element managers for iDRAC, Modular Infrastructure, Storage and Network devices is also supported by the OpenManage Plug-in to perform further troubleshooting, configuration and management activities.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: - Issue 1: In "Dell Server Overall Health Status" service, Power Supply Roll up status would be shown as UNKNOWN even if the actual Power supply Roll up status is OK after upgrading iDRAC firmware to 2.30.30.30 or a higher version when Dell server is discovered using WSMan. The actual status will be shown correctly once there is any change in the health status of the Power supply. - Issue 2: In "Dell Server Voltage Probe Status", service when one of the instance's actual status is UNKNOWN, that instance will appear as CRITICAL instead of UNKNOWN while monitoring using SNMP protocol with iDRAC firmware version lower than 2.30.30.30. - Issue 3: In "Dell Server Voltage Probe Status" service, some of the Voltage instances will be missing when Dell PowerEdge C6320 server is discovered using WSMan protocol with iDRAC firmware version lower than 2.30.30.30. - Issue 4: In "Dell Server Overall Health Status" service, Power Supply Status is shown as OK instead of UNKNOWN, when Dell PowerEdge T130 or Dell PowerEdge C6320 server is discovered using SNMP protocol, and when Dell PowerEdge DSS1510 server is discovered using SNMP or WSMan protocol with iDRAC firmware version lower than 2.30.30.30. - Issue 5: Dell EMC Warranty Status showing Critical if initial warranty is expired, but extended warranty still exists. - Issue 6: If a Dell Chassis is configured with only Internet Protocol Version 6 (IPv6) address and is not using the HTTPS default port number (default 443) and was discovered using the Host Name, then the users will not be able to access Chassis Management Controller (CMC) web interface from the Nagios XI console.
Enhancement: - Support for 14G servers and HCI (Hyper Converged Infrastructure) Platforms - Support Redfish REST APIs for monitoring PowerEdge Servers and HCI platforms - Support for Dell EMC Network Switches - Support for OEM Servers - Simplified plug-in installation and deployment with Enhanced host and service checks - Upgrade from previous Dell OpenManage Plug-in Version 1.0 to the current Dell EMC OpenManage Plug-in Version 3.0 for Nagios XI.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Install instructions: For installation, related information, see the "Dell EMC OpenManage Plug-in Version 3.0 for Nagios XI Installation Guide" at dell.com/openmanagemanuals