SanDisk X400 Series Solid State Drive Firmware Update
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the firmware for SanDisk X400 2.5 & M.2 2280 128GB, 256GB & 512GB, Revision X4152012 and is supported on Alienware, Inspiron, Latitude, Optiplex, Precision, Vostro and XPS models that are running the following Windows Operating System: Windows 7, Window 8, Windows 8.1 and Windows 10.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fixed issue encountered in some system where drive was lost during cold boot
Enhancement:
- Not Applicable
Read More- Fixed issue encountered in some system where drive was lost during cold boot
Enhancement:
- Not Applicable
Version
X4152012, A00
Release date
27 Mar 2017
Download Type
Firmware
Category
Storage
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: ZipPack External
File Name: SanDisk X400 HV8F3_ZPE.exe
File Size: 4.84 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
b008c072c12e37406d73692caaa33589
SHA1:
89d663e956987272f448faa94729e9abb2a4ee46
SHA-256:
9a9578661a0f1a5251919965036639614a21db3d6df7ffa781c52bce58642afa
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your may not function properly.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Windows 10, 32-bit
Windows 10, 64-bit
Looking for a different OS? View the list of Dell supported operating systems
Applies to
SANDISK X400 128G 7MM SSD (CLASS 20)
SANDISK X400 128G M.2 2280 SATA SSD (CLASS 20)
SANDISK X400 256G 7MM SSD (CLASS 20)
SANDISK X400 256G M.2 2280 SATA SSD (CLASS 20)
SANDISK X400 512G 7MM SSD (CLASS 20)
SANDISK X400 512G M.2 2280 SATA SSD (CLASS 20)
Installation instructions
Download
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Save the SanDisk SSD Updater executable file in a folder or directory on the target system.
2. Double click on the executable file to launch the application. Administrator rights will be required to perform this step.
3. The tool will scan the system and list all supported and detected SanDisk SSDs. If an SSD is not listed, click on the Refresh icon to rescan the system. If a Refresh fails to detect the SSD, check the SATA connection and try again.
If a supported target SSD is not detected, the SanDisk SSD Updater Tool will list the supported SSD models and firmware versions.
4. Select the drive that needs to be updated by clicking on the drive name.
5. Details about the drive will be shown on the right panel. The firmware update will be allowed for targeted models and firmware versions of SanDisk SSDs.
6. Click Update Firmware to start the firmware update.
7. A warning message will be displayed. Click Cancel to return to the drive list page, or click Update Firmware to continue.
8. After a successful firmware update, the host system and drive must be powered off to activate the new firmware.
9. Relaunch the application after powering up the host system to confirm that the firmware is up to date on the target drive.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual.
1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
------------------------------------------------------------------------------------------
ATTENTION
1. Backup the SSD.
2. Switch to AC Power
------------------------------------------------------------------------------------------
Firmware upgrade through the Windows utility
Procedure
1. Save the SanDisk SSD Updater executable file in a folder or directory on the target system.
2. Double click on the executable file to launch the application. Administrator rights will be required to perform this step.
3. The tool will scan the system and list all supported and detected SanDisk SSDs. If an SSD is not listed, click on the Refresh icon to rescan the system. If a Refresh fails to detect the SSD, check the SATA connection and try again.
If a supported target SSD is not detected, the SanDisk SSD Updater Tool will list the supported SSD models and firmware versions.
4. Select the drive that needs to be updated by clicking on the drive name.
5. Details about the drive will be shown on the right panel. The firmware update will be allowed for targeted models and firmware versions of SanDisk SSDs.
6. Click Update Firmware to start the firmware update.
7. A warning message will be displayed. Click Cancel to return to the drive list page, or click Update Firmware to continue.
8. After a successful firmware update, the host system and drive must be powered off to activate the new firmware.
9. Relaunch the application after powering up the host system to confirm that the firmware is up to date on the target drive.
*.Installation Instructions:
For the detail usage of this package, Please refer to the attached Update Tool Manual.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.