LITE-ON IT Solid State Drive Firmware Update
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the firmware for LITE-ON IT LCS-256L9S 2.5 7MM 256GB, Revision HC8110D Solid State Drive. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Improves the compatibility of the Solid State Drive (SSD) with the system when the system is in Low Power mode.
Read MoreVersion
HC8110D, A02
Release date
20 May 2015
Download Type
Firmware
Category
Storage
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: ZipPack External
File Name: LCS-256L9S-HC8110D_ZPE.exe
File Size: 1.56 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
e02dc7d2844f85e5463579e6f8f69788
SHA1:
f20ca19be729b31a65f257f192f1f53ea6f7953f
SHA-256:
16975333f8a70c7cab07b941457adea9265eb7abaad39c58f960e11b42cbedb0
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
It is recommended that you back up your data and switch to AC power after doing so. Use the SSD, whose firmware has to be updated, as a backup or an external storage device drive using the USB port. The new firmware can be activated only after restarting the system or a power reset.
Supported Operating Systems
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
Looking for a different OS? View the list of Dell supported operating systems
Applies to
LITEONIT LCS-256L9S 2.5 7MM 256GB
Installation instructions
Firmware upgrade through the Windows utility
Procedure
1. Run the utility to start the firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then click Update.
The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding.
3. Click OK to proceed.
Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system.
4. Close all open applications, and save your work before rebooting the system.
The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed.
5. Sign in to the operating system.
6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
Procedure
1. Go into the DOS subdirectory.
2. Insert a blank CD into your optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive in the target system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding. Click Y to proceed.
8. When the firmware upgrade process is completed, you are prompted to reboot the machine. Remove the CD from your optical drive, and reboot your system. It boots into Windows.
9. To confirm that the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
Procedure
1. Run the utility to start the firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then click Update.
The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding.
3. Click OK to proceed.
Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system.
4. Close all open applications, and save your work before rebooting the system.
The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed.
5. Sign in to the operating system.
6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
Procedure
1. Go into the DOS subdirectory.
2. Insert a blank CD into your optical drive.
3. Copy the ISO image into the blank CD.
4. Insert the CD (created from the above steps) into the optical drive in the target system.
5. Boot your system from the optical drive.
6. Select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding. Click Y to proceed.
8. When the firmware upgrade process is completed, you are prompted to reboot the machine. Remove the CD from your optical drive, and reboot your system. It boots into Windows.
9. To confirm that the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.