Dell PowerVault 220S/221S SES Firmware, v.E.19, A09

AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
The PV22xS_E19.bin file is the downloadable version of the enclosure firmware that provides management functions for the PowerVault 220S/221S. These functions include SCSI Enclosure Services (SES) and SCSI Accessed Fault-Tolerant Enclosures (SAF-TE) reporting to the host initiator, control of all enclosure LED indicators, and monitoring of all the enclosure's environmental elements.
Anbefalet

Find den bedste download til dit system

Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit system

Søg i support

Indtast din Dell-servicekode eller -model

Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan

Denne driver er ikke kompatibel

Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.

Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.

Programrettelser og forbedringer

This revision fixes a rare issue with the handling of SCSI bus parity error responses by the EMM. This may result in a SCSI bus reset and cause a pause of several seconds (depending on configuration) in I/O processing. The I/O operation will automatically retry and recover. There is no associated risk of data loss, security, long term reliability or other performance issues.
Læs mere

Version

E.19, A09

Udgivelsesdato

20 apr. 2006

Downloadtype

Firmware

Kategori

DAS

Vigtighed

Anbefalet
Dell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Tilgængelige formater Vis vigtige oplysninger
Filformat: Opdateringspakke til MS Windows 32-bit.
Filnavn: FRMW_WIN_R120937.EXE
Filstørrelse: 2.28 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages (DUP) i Microsoft Windows 32-bit-format er udviklet til at køre på Microsoft Windows 64-bit-operativsystemer. Dell Update Packages (DUP) i Microsoft Windows 64-bit-format kan kun køre på Microsoft Windows 64-bit-operativsystemer. Når du vælger en driveropdatering, skal du sørge for at vælge den udgave, der passer til dit operativsystem.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
5A4A441A7452BBD685271CAEB4CFACEC
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: En GnuPG-fil, der indeholder en kryptografisk signatur
Filnavn: FRMW_LX_R120937.BIN.sign
Filstørrelse: 194 Bytes
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
GnuPG-signaturen til Red Hat Linux Update Package kan bruges til at godkende Dells identitet i den samlede Red Hat Linux Update-pakke.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
994924C9ED536CDBD720757325B4D0B8
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Paker filer direkte ud til lokal disk
Filnavn: fupg_e19-R120937.exe
Filstørrelse: 38.56 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat består af et arkiv med filer, der kan dekomprimeres til en mappe på harddisken. Du kan derefter installere fra den pågældende mappe.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
47bd02d936053c433365c52416ec55f5
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Filformat: Opdateringspakke til Red Hat Linux
Filnavn: FRMW_LX_R120937.BIN
Filstørrelse: 5.78 MB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dell Update Packages til Linux kan bruges som et selvstændigt program der sikrer, at specifikke valideringskriterier opfyldes, før opdateringen anvendes.
Bemærk: Opdateringspakker til Linux er open-source. Se Vigtigt-filen Dell Update Packages til Linux for at få flere oplysninger.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
8A517D637EB687DC251382E5AC2868B1
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig

Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)

Yderligere oplysninger

Vis alle | Skjul alle
Known Limitations:



  1. In Joined bus/Clustering mode, firmware is downloaded to both EMMs automatically (assuming that the second EMM is installed) by failing over and then failing back. In Split bus mode, however, updating firmware on one EMM does not automatically update the other EMM. Therefore, in order to update both EMMs, the user must download directly through the cable to each EMM.


    NOTE: It is strictly prohibited to have an Active/Active cluster while doing firmware downloads to avoid issues with the cluster.


  2. When using Array Manager 3.1.1 (or less) in Clustering mode, EMM firmware can only be upgraded on the primary EMM (the left one when viewing the enclosure from the back). Therefore, in order to update both EMMs, the user must download firmware to each EMM individually.


  3. If the PV22XS is configured with one EMM and one termination module in Joined bus mode, an error message will pop up when upgrading the firmware through Array Manager 3.1.1 (or less). This is an invalid error message in this scenario. If the fans have gone back to normal speed, then the firmware download was successful. To verify this, stop and restart the Disk Management Service. Then you can view the firmware version under the enclosure properties.


  4. Firmware updates to enclosures attached to PERC 2/DC, PERC3/SC/QC/DC/DCL, or any PERC4 array controllers require that Array Manager be at release 3.4 or greater; while PERC 2/QC or PERC 3/Di controllers require that Array Manager be at least 3.5 or greater.


  5. Important Linux Requirements:
    "libstdc++-libc6.2-2.so.3" is required for running this application. If this library is not found on the system,the following error will appear.


    ./getSystemId: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory Collecting inventory...
    ./PV2XXA00: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory


    In order to install the missing files, you would need to install "compat-libstdc++-[Y.Y]-2.96.[XXX].i386.rpm" package from Red Hat distribution CD, where "XXX" is the version number of package and "Y.Y" is the release. Install the package as described below.


    E.g. on RH9.0 distribution do following:


    (Note: for RH9.0 the package to be installed is located on disc 1)


    # cd /mnt/cdrom/RedHat/RPMS
    # rpm -ihv compat-libstdc++-7.3-2.96.118.i386.rpm (e.g. on RH 9.0 distribution)





�
Instructions for fupg_e19-R120937.exe

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.


Updating Firmware Using Array Manager
(Windows & NetWare)


Dell OpenManage Array Manager software provides a comprehensive storage management solution that enables you to configure and manage local and remote storage attached to a system. Array Manager includes an integrated firmware update utility that can be used with the following operating systems:

  • Windows 2000 Server and Advanced Server

  • Windows Server 2003

  • Novell NetWare (all Dell-supported versions)


To update the firmware on your PowerVault 22xS storage system using Array Manager:

NOTE: In the following steps, xx refers to the firmware release number.

  1. Stop all I/O activity to the storage system.

  2. Create a directory on your local file system.

  3. Download the FUPG_Exx.EXE file to a directory on your hard drive. The file downloaded is a self-extracting executable.

  4. Double-click the FUPG_Exx.exe file to extract the firmware update files to your system's hard drive.

  5. On the host system, click the Start button and select Programs > Dell OpenManage Applications
    > Array Manager > Array Manager Console.

  6. Select Arrays > PERC Subsystem.

  7. Select the controller that is linked to the enclosure you are upgrading.

  8. Right-click the enclosure object and select Download Firmware.

  9. Navigate to the .bin file that was extracted in step 4.

  10. Double-click the .bin file and follow the directions on your screen. When the update is complete, a message appears indicating that the update was successful.

    Note: The firmware update may take up to 5 minutes to complete depending on the server speed. Please allow the appropriate time for the firmware update to complete.

  11. Restart I/O activity to the storage system.



Dell Update Package Instructions for FRMW_WIN_R120937.EXE:

Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.


Dell Update Package Instructions for FRMW_LX_R120937.BIN:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the "./FRMW_LX_R120937.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./FRMW_LX_R120937.BIN" from the shell.
5. Follow the remaining prompts to perform the update.


GnuPG Signature of Dell Update Package Instructions for FRMW_LX_R120937.BIN.sign:

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Import

Hjælp og selvstudier til drivere