LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, v.4.18, A08
AUTOMATISK INSTALLERET Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
NT4 driver for the PERC 3/SC, PERC 3/DC, PERC 3/DCL and PERC
3/QC.
3/QC.
Anbefalet
Find den bedste download til dit system
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit systemSøg i support
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id. Vis mig hvordan
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden. Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
Changes from 4.17.2:
1. String names for PERC has been modified in the setup files to fit the screen.
Læs mere1. String names for PERC has been modified in the setup files to fit the screen.
Version
4.18, A08
Udgivelsesdato
08 maj 2003
Downloadtype
Driver
Kategori
SCSI RAID
Vigtighed
ValgfritDell Technologies anbefaler at gennemse denne opdatering for at afgøre, om den er relevant for dit system. Opdateringen indeholder ændringer, der kun har indflydelse på visse konfigurationer, eller tilvejebringer nye funktioner, der muligvis passer til dit miljø.
Tilgængelige formater
Filformat: Paker filer direkte ud til lokal disk
Filnavn: PERC3-NT418-A08.exe
Filstørrelse: 48.6 KB
Dette er en stor fil. Det kan tage et stykke tid at downloade den, afhængigt af din downloadhastighed.
Formatbeskrivelse:
Dette filformat består af et arkiv med filer, der kan dekomprimeres til en mappe på harddisken. Du kan derefter installere fra den pågældende mappe.
Kontrollér kontrolsumværdien for at sikre overførslens integritet.
MD5:
Ikke tilgængelig
SHA1:
Ikke tilgængelig
SHA-256:
Ikke tilgængelig
Når du downloader filerne, accepterer du samtidig betingelserne i Dells softwarelicensaftale. (på engelsk)
Understøttede operativsystemer
Windows NT 4.0
Er du på udkig efter et andet operativsystem? Se listen med Dell-understøttede operativsystemer
Gælder for
�
PERC3/SC
Installationsvejledning
Custom Instructions for PERC3-NT418-A08.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to upzip the files.
3. Click on the unzip button to extract files.
Performing a New Installation of Windows NT 4.0
Making PERC/CERC the Primary Controller in Windows NT 4.0
1. Boot the system using the Windows NT 4.0 CD. As the message "Setup is inspecting your computer's hardware configuration." appears. Press F6 immediately.
2. Within a few seconds, the Windows NT Setup screen appears, requesting additional adapters in the system. Press 'S' to specify an additional device, then press Enter on the OTHER option in the selection screen.
3. Insert the PERC/CERC driver diskette created above and press Enter. "CERC ATA100/4ch; PERC2/3/4 Series Windows NT Driver" appears. Press Enter to load the driver.
4. Press 'S' to load additional mass storage device driver if required. Otherwise, press Enter to continue installation process as usual. Windows NT 4.0 continues to be installed as usual. Please refer to the operating system installation documentation for further steps.
Making PERC/CERC a Secondary Controller in Windows NT 4.0
1. Start the Windows NT 4.0 installation process. Load the device for the primary controller if necessary.
2. Windows NT Server Setup screen is displayed after loading Windows NT Kernel. Press Enter to continue.
3. Setup displays mass storage devices that it has recognized in your computer. Press 'S' to specify an additional device, then press Enter on the OTHER option in the selection screen.
4. Insert the PERC/CERC driver diskette created above and press Enter. "CERC ATA100/4ch; PERC2/3/4 Series Windows NT Driver" appears. Press Enter to load the driver.
5. Press 'S' to load additional mass storage device drivers if required; otherwise, press Enter to continue the installation process as usual. Windows NT 4.0 continues to be installed as usual. Please refer to the operating system installation documentation for further steps.
Adding the PERC 3 Driver to an Existing Windows NT 4.0 Server
1. Insert the PERC/CERC driver diskette created above in appropriate drive. The driver files can also be installed from a local or network drive.
2. Click on Start > Control Panel > Settings. Double-click on the Small Computer System Interface (SCSI) Adapter icon.
3. Select the Drivers tab.
4. Click on the Add button.
5. Select Have Disk.
6. The Install From Disk box appears. Specify the location of the PERC/CERC Windows NT 4.0 driver and click on OK.
7. Click on OK to add the PERC/CERC Windows NT 4.0 driver.
This procedure will install the PERC/CERC drivers for Windows NT v4.0.
8. You must reboot the system after installation has been completed successfully.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to upzip the files.
3. Click on the unzip button to extract files.
Performing a New Installation of Windows NT 4.0
Making PERC/CERC the Primary Controller in Windows NT 4.0
1. Boot the system using the Windows NT 4.0 CD. As the message "Setup is inspecting your computer's hardware configuration." appears. Press F6 immediately.
2. Within a few seconds, the Windows NT Setup screen appears, requesting additional adapters in the system. Press 'S' to specify an additional device, then press Enter on the OTHER option in the selection screen.
3. Insert the PERC/CERC driver diskette created above and press Enter. "CERC ATA100/4ch; PERC2/3/4 Series Windows NT Driver" appears. Press Enter to load the driver.
4. Press 'S' to load additional mass storage device driver if required. Otherwise, press Enter to continue installation process as usual. Windows NT 4.0 continues to be installed as usual. Please refer to the operating system installation documentation for further steps.
Making PERC/CERC a Secondary Controller in Windows NT 4.0
1. Start the Windows NT 4.0 installation process. Load the device for the primary controller if necessary.
2. Windows NT Server Setup screen is displayed after loading Windows NT Kernel. Press Enter to continue.
3. Setup displays mass storage devices that it has recognized in your computer. Press 'S' to specify an additional device, then press Enter on the OTHER option in the selection screen.
4. Insert the PERC/CERC driver diskette created above and press Enter. "CERC ATA100/4ch; PERC2/3/4 Series Windows NT Driver" appears. Press Enter to load the driver.
5. Press 'S' to load additional mass storage device drivers if required; otherwise, press Enter to continue the installation process as usual. Windows NT 4.0 continues to be installed as usual. Please refer to the operating system installation documentation for further steps.
Adding the PERC 3 Driver to an Existing Windows NT 4.0 Server
1. Insert the PERC/CERC driver diskette created above in appropriate drive. The driver files can also be installed from a local or network drive.
2. Click on Start > Control Panel > Settings. Double-click on the Small Computer System Interface (SCSI) Adapter icon.
3. Select the Drivers tab.
4. Click on the Add button.
5. Select Have Disk.
6. The Install From Disk box appears. Specify the location of the PERC/CERC Windows NT 4.0 driver and click on OK.
7. Click on OK to add the PERC/CERC Windows NT 4.0 driver.
This procedure will install the PERC/CERC drivers for Windows NT v4.0.
8. You must reboot the system after installation has been completed successfully.
Hjælp og selvstudier til drivere
Du kan finde flere downloads på Drivere og overførsler. Hvis du har brug for hjælp til at bruge oplysningerne på denne side, kan du besøge Hjælp og selvstudier til drivere.