Dell OpenManage Server Administrator Managed Node, v.1.6, A00
AUTOMATISCH GEÏNSTALLEERD Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Dell OpenManage Server Administrator is a secure Web tool for managing
individual Dell(TM)PowerEdge(TM) servers. Using this tool, an
administrator with an Internet/intranet connection can manage the server
from any location using either a graphical user interface (GUI) that runs
in a Web browser or a command line interface (CLI) that is accessed
through the command prompt.
individual Dell(TM)PowerEdge(TM) servers. Using this tool, an
administrator with an Internet/intranet connection can manage the server
from any location using either a graphical user interface (GUI) that runs
in a Web browser or a command line interface (CLI) that is accessed
through the command prompt.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in. Meer informatie
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op. Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
* Added Novell Netware 6.5 as a supported operating system.
* For a complete list of fixes/enhancements, refer to the README file, readme.txt
Meer lezen* For a complete list of fixes/enhancements, refer to the README file, readme.txt
Versie
1.6, A00
Releasedatum
20 feb. 2004
Downloadtype
Applicaties
Categorie
Systeembeheer
Belang
OptioneelDell Technologies raadt aan om deze update te bekijken om te bepalen of deze van toepassing is op uw systeem. De update bevat wijzigingen die alleen invloed hebben op sommige configuraties, of bevat nieuwe functies die al dan niet op uw omgeving van toepassing zijn.
Beschikbare bestandsindelingen
Bestandsindeling: Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam: om36_nw_managed_systemA00.exe
Bestandsgrootte: 21.87 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell. (in het Engels)
Ondersteunde besturingssystemen
Novell NetWare
Op zoek naar een ander besturingssysteem? Bekijk de lijst met door Dell ondersteunde besturingssystemen
Installatie-instructies
Custom Instructions for om36_nw_managed_systemA00.exe:
1) Unzip the netware package on a Windows system running Novell
Netware client. Make sure to unzip the package on a Windows Drive,
which is mapped to the desired Netware share e.g.(SYS:\public\) on
your Netware Server.
NOTE: You cannot enter spaces in the path name.
NOTE: Any additional sub-directory names must be limited to 8
charactors or fewer.
2) In the NetWare Configuration screen under Configuration Options,
select Product Options and press [Enter].
3) On the Other Installation Actions menu, select Install a product not
listed and press [Enter].
NOTE: A dialog box listing previously selected paths might appear
after you press [Enter]. Press [Esc] to close this dialog box.
4) A default message appears, stating that the product is to be
installed from drive A.
5) Press [F3] to specify a different installation path.
6) Delete a: and type the path to the shared directory that was
mapped on the netware client machine:
SYS:\public\(*.ips file):netware
NOTE: You cannot enter spaces in the path name.
7) After you enter the path, press [Enter] to continue.
8) A message appears, stating:
Indicate which file groups you want installed.
Server Administrator is not listed as a selection because it is
installed by default.
9) Select the other components you want to install.
NOTE: Items selected for installation have an X next to them.
Pressing [Enter] next to an item selects that item. Pressing the
spacebar next to an item switches the selection between selected
and not selected.
10) To accept the components you have selected and to continue
with the installation, press [F10].
11) The installation of Server Administrator and the components you
selected begins. Status messages appear.
12) The Systems Management Security Utility appears and asks
whether you want to change the default security settings.
NOTE: The default root password is "calvin".
13) Select one of the following options:
'Y' for Yes, 'N' for No, 'Q' to Quit
14) Press [Enter] if you want to add or change a user other
than "root". You can change defaults for "root". You are prompted
for a user name and password. When you are finished adding users,
press [Enter] to return to the installation program.
15) Press [Enter] to quit the security utility and to accept default
"root" security. The installation of Server Administrator and the
components you selected continues. Status messages appear.
The instrumentation service utility appears and asks whether you
want to disable SNMP set operations in instrumentation service.
Press 'Y' for Yes, 'N' for No, and 'Q' to Quit.
16) When a dialog box appears, press [Enter] to continue.
17) When the installation of Server Administrator completes, press
[Esc] twice and [Enter] once to return to the console prompt and
exit the nwconfig program.
18) Restart your system before using the software.
1) Unzip the netware package on a Windows system running Novell
Netware client. Make sure to unzip the package on a Windows Drive,
which is mapped to the desired Netware share e.g.(SYS:\public\) on
your Netware Server.
NOTE: You cannot enter spaces in the path name.
NOTE: Any additional sub-directory names must be limited to 8
charactors or fewer.
2) In the NetWare Configuration screen under Configuration Options,
select Product Options and press [Enter].
3) On the Other Installation Actions menu, select Install a product not
listed and press [Enter].
NOTE: A dialog box listing previously selected paths might appear
after you press [Enter]. Press [Esc] to close this dialog box.
4) A default message appears, stating that the product is to be
installed from drive A.
5) Press [F3] to specify a different installation path.
6) Delete a: and type the path to the shared directory that was
mapped on the netware client machine:
SYS:\public\(*.ips file):netware
NOTE: You cannot enter spaces in the path name.
7) After you enter the path, press [Enter] to continue.
8) A message appears, stating:
Indicate which file groups you want installed.
Server Administrator is not listed as a selection because it is
installed by default.
9) Select the other components you want to install.
NOTE: Items selected for installation have an X next to them.
Pressing [Enter] next to an item selects that item. Pressing the
spacebar next to an item switches the selection between selected
and not selected.
10) To accept the components you have selected and to continue
with the installation, press [F10].
11) The installation of Server Administrator and the components you
selected begins. Status messages appear.
12) The Systems Management Security Utility appears and asks
whether you want to change the default security settings.
NOTE: The default root password is "calvin".
13) Select one of the following options:
'Y' for Yes, 'N' for No, 'Q' to Quit
14) Press [Enter] if you want to add or change a user other
than "root". You can change defaults for "root". You are prompted
for a user name and password. When you are finished adding users,
press [Enter] to return to the installation program.
15) Press [Enter] to quit the security utility and to accept default
"root" security. The installation of Server Administrator and the
components you selected continues. Status messages appear.
The instrumentation service utility appears and asks whether you
want to disable SNMP set operations in instrumentation service.
Press 'Y' for Yes, 'N' for No, and 'Q' to Quit.
16) When a dialog box appears, press [Enter] to continue.
17) When the installation of Server Administrator completes, press
[Esc] twice and [Enter] once to return to the console prompt and
exit the nwconfig program.
18) Restart your system before using the software.
Help en zelfstudies voor drivers
Ga voor meer downloads naar Drivers en downloads. Voor hulp bij het gebruik van de informatie op deze pagina, gaat u naar Hulp en zelfstudies voor drivers.