Intel SSD SATA SSDSC2BA100G3T, SSDSC2BA200G3T, SSDSC2BA400G3T and SSDSC2BA800G3T firmware version DL05
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains firmware version DL05 for Intel SSD (SSD 2.5 SATA) 100GB, 200GB, 400GB and 800GB Hard Drives. Dell. Vendor model numbers INTEL SSDSC2BA100G3T, INTEL SSDSC2BA200G3T, INTEL SSDSC2BA400G3T and INTEL SSDSC2BA800G3T.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
'-Resolved several cases where drive appears to be 8MB (ASSERT condition)
-Resolved TRIM command handling issues
-Resolved drive enumeration failure upon simultaneous occurrence of a NAND defect and a PLI event
-Performance enhancement for read/write/verify
-Limit SCT customization command execution to 100 cycles
-Resolved drive's being unresponsive on an out-of-range NCQ command
-DST short reports correct status when interrupted by power cycle
Read More-Resolved TRIM command handling issues
-Resolved drive enumeration failure upon simultaneous occurrence of a NAND defect and a PLI event
-Performance enhancement for read/write/verify
-Limit SCT customization command execution to 100 cycles
-Resolved drive's being unresponsive on an out-of-range NCQ command
-DST short reports correct status when interrupted by power cycle
Version
DL05, A00
Release date
31 Oct 2013
Download Type
Firmware
Category
Storage
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: Serial-ATA_Firmware_48JFX_WN64_DL05_X03.EXE
File Size: 17.21 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
0d3e16a8018e0da081cdd91e9bfcca06
SHA1:
26a9b1789edcadf38a7f33ced167d83a282d9060
SHA-256:
c524c199f95c9bf2a6397c4af392eff9c4e42bb5c94a5fd334f95be3710087e1
File Format: A GnuPG file which contains a cryptographic signature
File Name: Serial-ATA_Firmware_48JFX_LN_DL05_X03.BIN.sign
File Size: 189 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
0fcf50e5f2527df800ca8f7dd1422e39
SHA1:
f084e88588dc6fd822d407552aef2a3573110678
SHA-256:
2f2285eb2532ac6a7609106a04abf02ef4c5aa976a1402b659c85fb2f34d85ac
File Format: Update Package for MS Windows 32-Bit
File Name: Serial-ATA_Firmware_48JFX_WN32_DL05_X03.EXE
File Size: 9.32 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
3a45779d803190c791c6d8267f27455f
SHA1:
41732f45d5e2214b3c159e3742e36ce1a0376188
SHA-256:
e9df450f3f7c84c8c652232da92eaf946160806005d57531950cc57c27c134bb
File Format: Update Package for Red Hat Linux
File Name: Serial-ATA_Firmware_48JFX_LN_DL05_X03.BIN
File Size: 9.3 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
e4c22413b715cd4446d24e6090cb4f02
SHA1:
9800395fae4291b9c0a35539d2671101ce9221ce
SHA-256:
c741263effee9f4ccd874ab1a960d769601e1db24cfc263341f241635babee94
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Ent Linux 4.5
Red Hat® Ent Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Windows Server 2012
Red Hat® Ent Linux 4.7
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Ent Linux 5
Novell SuSE Linux ES 10
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Looking for a different OS? View the list of Dell supported operating systems
Applies to
Intel SSD DC S3700 100GB SATA
Intel SSD DC S3700 200GB SATA
Intel SSD DC S3700 400GB SATA
Intel SSD DC S3700 800GB SATA
Installation instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.