AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package contains the firmware for LITE-ON IT LCS-256L9S 2.5 7MM 256GB, Revision HC8110D Solid State Drive. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Improves the compatibility of the Solid State Drive (SSD) with the system when the system is in Low Power mode.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
It is recommended that you back up your data and switch to AC power after doing so. Use the SSD, whose firmware has to be updated, as a backup or an external storage device drive using the USB port. The new firmware can be activated only after restarting the system or a power reset.
Procedure 1. Run the utility to start the firmware update process. 2. On the first screen, if the target SSD is not listed, select it and then click Update. The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding. 3. Click OK to proceed. Firmware upgrade proceeds. When the firmware upgrade process completes, you are prompted to reboot the system. 4. Close all open applications, and save your work before rebooting the system. The system reboots and loads the firmware. Once the firmware update is complete, a message saying the firmware update done is displayed. 5. Sign in to the operating system. 6. To confirm that the firmware update was successful, open Device manager > open SSD> click Properties> choose hardware ID under Details and check the firmware version.
Firmware upgrade through the DOS utility
Procedure 1. Go into the DOS subdirectory. 2. Insert a blank CD into your optical drive. 3. Copy the ISO image into the blank CD. 4. Insert the CD (created from the above steps) into the optical drive in the target system. 5. Boot your system from the optical drive. 6. Select the targeted drive once your system boots into DOS. 7. The next screen is a warning message. It states the risks and reminds user to back up important files before proceeding. Click Y to proceed. 8. When the firmware upgrade process is completed, you are prompted to reboot the machine. Remove the CD from your optical drive, and reboot your system. It boots into Windows. 9. To confirm that the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.