LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, PERC 4/Di, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, v.1.03, A02

AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
MegaPR for Windows is a utility that allows the user to start and stop Patrol Read on specified PERC controllers from the Windows environment. MegaPR can also display the current status of Patrol Read on a given PERC controller. Online help is available by typing 'MegaPR ?'. For further information concerning Patrol Read, see the latest PERC User's Guide on http://support.dell.com.
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

Initial Release of MegaPR for Windows.
En savoir plus

Version

1.03, A02

Date de publication :

07 جوان 2005

Type de téléchargement

Utilitaire

Catégorie

RAID SCSI

Importance

En option
Dell Technologies recommande de consulter cette mise à jour pour déterminer si elle s’applique à votre système. La mise à jour comprend des modifications n’ayant d’impact que sur certaines configurations, ou propose de nouvelles fonctionnalités pouvant s’appliquer ou non à votre environnement.
Formats disponibles Afficher les informations importantes

Format de fichier : Extrait des fichiers directement vers le disque local
Nom du fichier : MegaPR_Windows_A02.exe
Taille du fichier : 108 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier comprend une archive de fichiers qui peut être décompressée sur un répertoire du disque dur. L’installation peut être effectuée à partir de ce répertoire.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
Non disponible
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : Notes de publication externe
Nom du fichier : MegaPR_Windows_A02.txt
Taille du fichier : 4.66 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier contient du texte brut qui peut être affiché avec un éditeur de texte standard.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
Non disponible
SHA1 :
Non disponible
SHA-256 :
Non disponible

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
- MegaPR for Windows requires a minimum level of firmware in order to operate with a PERC controller.

- MegaPR for Windows is only supported on firmware versions listed in the MegaPR Release Notes document or later versions. Do not run MegaPR on controllers with firmware older than the versions listed in the Compatibility/Minimum Requirements section of the MegaPR Release Notes.

- MegaPR will display 'Option not supported for adp 0' for any operations attempted when Patrol Read mode for the controller is set to Disable. The adapter number referenced in the message will correspond to the adapter number specified in the MegaPR command. The Patrol Read mode must be set to Auto or Manual for MegaPR to start or stop a PR iteration. To change the Patrol Read mode on an adapter, enter the PERC BIOS configuration utility by pressing CTRL+M at controller initialization during system POST. Go to Objects, and then select the Adapter menu. If multiple adapters are in the server, select the appropriate adapter. Now choose Patrol Read Options. Change the Patrol Read Mode to Auto or Manual. MegaPR will now be able to start, stop, or display status for Patrol Read from Windows.

- Typing 'megapr ?' displays help information for the MegaPR utility. The example given for command specific help displays '-ctlrInfo ?', which is not a supported option. Supported options include -dispPR, -startPR, and -stopPR.

- For further information concerning the MegaPR utility or the Patrol Read feature, see the latest PERC User's Guide on http://support.dell.com.
Windows Server 2003
Windows 2000
Windows Powered
Windows Server 2003 x64
PERC 4/DC
PERC 4/SC
PERC3/SC
Custom Instructions for MegaPR_Windows_A02.exe:

Download
--------
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.


Extract Files
-------------
1. Browse to the location where the file was downloaded and double-click the file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract the files.


Files included in this release:
-------------------------------

megapr.exe
- MegaPR executable file

MegaPR_Windows_A02.txt
- MegaPR for Windows readme file

Custom Instructions for MegaPR_Windows_A02.txt:

Download the readme file 'MegaPR_Windows_A02.txt' for information concerning this release.


Aide et didacticiels sur les pilotes