DX Monitor Nagios 1.0.0

AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Dell DX6000, DX Monitoring Nagios, 1.0.0
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

DX Cluster Monitoring using open source Nagios.
En savoir plus

Version

1.0.0, 1.0.0

Date de publication :

20 جويلية 2012

Type de téléchargement

Utilitaire

Catégorie

Utilitaires système

Importance

En option
Dell Technologies recommande de consulter cette mise à jour pour déterminer si elle s’applique à votre système. La mise à jour comprend des modifications n’ayant d’impact que sur certaines configurations, ou propose de nouvelles fonctionnalités pouvant s’appliquer ou non à votre environnement.
Formats disponibles Afficher les informations importantes

Format de fichier : Pilotes de base pour la création d’images
Nom du fichier : DXMonitorNagios1.0.0.zip
Taille du fichier : 12.06 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
f0670df00c60008275635737d929a46d
SHA1 :
4768bed90c80b2b2773bc3b774db28b26ceff9ac
SHA-256 :
a46f5eaa7125e494b6a0f4b18391e53a879da34bef5b3212e0349b28d947fe1f

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
This package installs and enables DX monitoring via Nagios.
DX Monitoring via Nagios Version 1.0
DX Monitoring via Nagios Plugin install instructions. (Version 1.0.0)

Disclaimer:
The DXMonitorNagios bundle contains nagios open source packages in RHEL5 directory. The corresponding source rpms are in the SOURCES directory. Both the rpms and sources were obtained from the following locations:
http://apt.sw.be/redhat/el5/en/source/
http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/

NOTE: DXMonitorNagios1.0.0 is supported on RHEL5.5 for the CSN2.1.1 bundle *only*.

Installation instructions:
1. Download the latest version of DXMonitorNagios package from http://support.dell.com under the DX6000 product.

2. Copy the zip file to /opt/dell directory on your CSN.

3. unzip DX Monitor Nagios zip.

# cd /opt/dell
# unzip DXMonitorNagios1.0.0.zip

4. change the directory to DXMonitorNagios

# cd DXMonitorNagios1.0.0

5. Run the DX Monitor Nagios installer

# ./DXMonitor-Nagios-install.sh

5.1 Provide your email address to receive DX monitoring notification emails.
5.2 Provide your SMTP email server address or DNS name.
5.3 The installer will install and configure DX Monitoring service using Nagios.
5.4 Once configuration is complete it will send you a test email to the email address you provided. Once you receive the email, enter 'yes' to confirm correct installation and configuration and to exit the installer program.

CONFIGURATION

NOTE: DO NOT change the preconfigured Nagios configuration files.

The DX Monitor preconfigures the Nagios web console to run on HTTP port 9090, with a default username and password of nagiosadmin and dell, respectively.

1. Enter http://localhost:9090/nagios in your web browser to login to the Nagios web console.
2. Click the Current Status -> Services tab in the Nagios web console to list and monitor all preconfigured DX Services.
3. For information on Nagios usage, click the General -> Documentation tab.
4. The installer has preconfigured all of the settings required for DX Cluster monitoring and notification. The Nagios configuration files are installed in the /etc/nagios directory.

Using DX Monitoring via Nagios:
1. Login in Nagios web console using "http://localhost:9090/nagios" address with username "nagiosadmin" and default password "dell".
2. Click "Current Status -> Services" in Nagios web console to list and monitor all DX services. DXMonitorNagios will pre configure Nagios services to monitor your DX cluster including CSN services.
3. Check DX Monitor Nagios Admin Guide for more information.

NOTE: Do NOT change the Nagios configuration files preconfigured to manage your DX cluster.

Uninstall instructions:

1. Run the DX Monitoring uninstaller to remove all packages and configuration files from the CSN.

# cd /opt/dell/DXMonitorNagios1.0.0
# ./DXMonitor-Nagios-remove.sh

Aide et didacticiels sur les pilotes