INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS ST31000340AS
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
The DE13 firmware corrects potential hang on power up. Drive will appear not accessible after hang.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
Dell Technologies recomienda encarecidamente aplicar esta actualización importante tan pronto como sea posible. La actualización incluye correcciones de errores críticos y cambios para mejorar la funcionalidad, la fiabilidad y la estabilidad del sistema Dell. También puede incluir correcciones de seguridad y otras mejoras de funciones.
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
ead5c107eded39e0fab3cc5b65c1d89f
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Una o varias imágenes de disco autoextraíbles dentro de un zip autoextraíble
Nombre de archivo:BR213714.exe
Tamaño de archivo:1.03 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data. 2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again. 3. Choose "Continue" in the next window to create a bootable floppy. 4. Close all applications and restart system. 5. Press F12 and insert the floppy disk containing the firmware update. 6. Select boot from Floppy. 7. The Seagate Firmware Update will start automatically. 8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 9. Once completed, a message indicating process completion will appear. 10. Remove the floppy diskette and power off your system. 11. Power on your system to continue normal operation. Custom Instructions for R213714.EXE:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable CD option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO". 5. Restart your system. 6. Press F12 and insert the CD containing the firmware update. 7. Select boot from CD/DVD. 8. The Seagate utility will start automatically. 9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 10. Once completed, a message indicating process completion will appear. 11. Remove the CD and power off your PC. 12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. The files are located in "C:\DELL\Drivers\R213714\Files" directory. 5. Add the files to your bootable USB key. 6. Restart your system. 7. Insert your USB key containing the firmware update. 8. Press F12 and choose boot from USB 9. The Seagate utility will start automatically. 10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 11. Once completed, a message indicating process completion will appear. 12. Remove the Bootable Media and power off your system.