Intel Matrix Storage Manager: computadora de escritorio, versión 8.9.0.1023, A00
INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Intel Matrix Storage Manager Vista/Win7 64bit Driver (for pre-installation using the F6 method only)
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización recoge cambios para mantener el estado general del sistema. Garantiza que el software del sistema esté actualizado y que sea compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
For per-installation using F6 method only: 1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root directory: iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation, press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the location to install Vista, click Load Driver to install a third party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection for one of the controllers listed in the Overview (Section 1) of this document depending on your hardware version and configuration.
7. Highlight the selection that is appropriate for the hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root directory: iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation, press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the location to install Vista, click Load Driver to install a third party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection for one of the controllers listed in the Overview (Section 1) of this document depending on your hardware version and configuration.
7. Highlight the selection that is appropriate for the hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.