No apague el equipo ni lo desconecte de la fuente de alimentación mientras actualiza el BIOS, ya que podría dañarlo. Durante la actualización, el equipo se reiniciará y verá una pantalla negra durante unos instantes.
Lea las instrucciones de instalación y la información que se muestra a continuación antes de la actualización.
Dell Latitude X300 System BIOS, A10
INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Latitude X300 System BIOS
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
Issues Fixed: ============= 1. To maintain "password on boot" configuration after the running PSA, Removed a "Setup default load" before PSA execution and Restored a original value of IPL selection bit in cmos before running the Onboard diag .
Dell Technologies recomienda revisar esta actualización para determinar si se aplica a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formato de archivo:Una o varias imágenes de disco autoextraíbles dentro de un zip autoextraíble
Nombre de archivo:BR112427.exe
Tamaño de archivo:908 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Ejecutable de Flash BIOS
Nombre de archivo:X300_A10.exe
Tamaño de archivo:765.77 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este formato de archivo se compone de un archivo ejecutable del BIOS. Para actualizar su sistema, descargue el archivo y guárdelo en su equipo de sobremesa o el disco duro y, a continuación, ejecute el archivo ejecutable. Para actualizar el BIOS, el sistema debe tener conexión de alimentación de CA y un nivel de carga de la batería de al menos el 10 %.
If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.
Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS.
If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power.
Ensure that the Flash BIOS disk is inserted into the floppy disk drive.
Click the Start button, click Shut Down, click Restart, then click OK.
The computer will restart and boot to the floppy disk.
NOTE:
If the flash BIOS pro
¿Necesita ayuda para solucionar problemas del BIOS?
Busque un remedio en la guía de uso y solución de problemas de BIOS de Dell.