INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
PowerVault 35F firmware version d9908e.
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Versión
d9908e, D9908E
Fecha de publicación
06 feb 2001
Tipo de descarga
Firmware
Categoría
Fibre Channel
Importancia
Opcional
Dell Technologies recomienda revisar esta actualización para determinar si se aplica a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formato de archivo:Una o varias imágenes de disco autoextraíbles dentro de un zip autoextraíble
Nombre de archivo:D9908E.exe
Tamaño de archivo:553 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
The PowerVault 35F can either use FTP, TFTP or a serial connection (using the XMODEM protocol) to update the firmware. In order to update the firmware via the serial connection, the PowerVault 35F must be connected to a terminal emulation program supporting XMODEM transfers. This menu item does not appear when accessing the configuration menus through Telnet.
To download firmware using FTP:
1. Connect your computer to the PowerVault 35F’ s Ethernet port.
2. Start your FTP program using the PowerVault 35F’ s IP address:
ftp
Note: The default IP address is 1.1.1.1. See the Change IP Address section of this chapter for information on changing the PowerVault 35F IP address.
3. Use root as the user name and password as the password. To change the user name and password, see the Change Security Settings section of this chapter.
4. Specify binary mode:
bin
5. Specify the firmware’s path and filename with the put command: put
The file will transfer and the PowerVault 35F will reboot. The PowerVault 35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by checking the PowerVault 35F’s reboot messages through the serial interface.
To download firmware using TFTP:
1. Connect your computer using the PowerVault 35F’s Ethernet port.
2. At the command line, type the following command:
tftp -i put
The file will tranfer and the PowerVault 35F will reboot. The PowerVault 35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by checking the PowerVault 35F’ s reboot messages through the serial interface.
To download firmware using a terminal emulator:
NOTE: For quicker downloading, configure the PowerVault 35F and the terminal emulator utility session connected to it (such as Hyperterminal) to run at 115200.
1. Establish a Serial Connection to the PowerVault 35F.
2. From the Advanced Options menu, select the Download a new revision of the Firmware command to start the download procedure.
3. When you confirm you want to download, the PowerVault 35F will start the download process.
4. Use the Transfer® Send File option in the terminal emulator utility.
5. Select the location of the firmware. Use the Browse button, if you need help finding it.
6. Make sure you select XMODEM as the protocol.
7. Press the Send button.
8. The firmware will begin to download.
When the download is complete, the system verifies that the firmware image was successfully written to the FLASH memory and then reboots the PowerVault 35F. Upon reboot, the PowerVault 35F detects that there is a newly downloaded firmware image and copies that image to the boot sector of the FLASH and then boots with that image. At that point the PowerVault 35F is using the new firmware image.