Dell PowerVault 224F/660F SES Firmware, v. 1.9.5, A01
INSTALACIÓN AUTOMÁTICA Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
SES 1.9.5 Test Release Notes
The SES195.bin file is the required file for the download. It is highly
recommended that all I/O is stopped before beginning this procedure.
You must update the SES firmware on each LS module in the PowerVault 660
and each of the attached enclosures. This includes the 660F as well as all
attached 224F enclosures.
If you are replacing an LS module, or adding new PowerVault 224 units to
an existing subsystem, you should update all LS modules with this firmware.
Enclosure services must be online to update the firmware. If enclosure
services are offline then restore them to the online state before
performing the following procedure.
The SES195.bin file is the required file for the download. It is highly
recommended that all I/O is stopped before beginning this procedure.
You must update the SES firmware on each LS module in the PowerVault 660
and each of the attached enclosures. This includes the 660F as well as all
attached 224F enclosures.
If you are replacing an LS module, or adding new PowerVault 224 units to
an existing subsystem, you should update all LS modules with this firmware.
Enclosure services must be online to update the firmware. If enclosure
services are offline then restore them to the online state before
performing the following procedure.
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistemaBúsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto. ¿Cómo lo hago?
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema. Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
Improvements to SES 1.9.5
SES 1.9.5 enhances the communication between SES modules. In the past
there were times when thresholds set on the master SES were not copied to
the slave SES. In a failover scenario the slave would apply the old
values, requiring that the user reset the new thresholds.
SES 1.9.5 enhances reporting so that when an LS module fails, Dell Open
Manage Array Manager can report the problem. The LED for the LS module
will, as in previous versions, still light when an LS module is in a
failed state.
SES 1.9.5 now reports the correct model name of the system, either PV660
or PV224.
In SES 1.3b2, upper warning/critical for LS Module temperature sensors is
45C/55C and for power supply sensors is 55C/65C, which is incorrect. The
correct settings are in SES 1.9.5 and are 35C/45C for the LS module
temperature sensors and 45C/55C for the power supply.
Más informaciónSES 1.9.5 enhances the communication between SES modules. In the past
there were times when thresholds set on the master SES were not copied to
the slave SES. In a failover scenario the slave would apply the old
values, requiring that the user reset the new thresholds.
SES 1.9.5 enhances reporting so that when an LS module fails, Dell Open
Manage Array Manager can report the problem. The LED for the LS module
will, as in previous versions, still light when an LS module is in a
failed state.
SES 1.9.5 now reports the correct model name of the system, either PV660
or PV224.
In SES 1.3b2, upper warning/critical for LS Module temperature sensors is
45C/55C and for power supply sensors is 55C/65C, which is incorrect. The
correct settings are in SES 1.9.5 and are 35C/45C for the LS module
temperature sensors and 45C/55C for the power supply.
Versión
1.9.5, A01
Fecha de publicación
20 sept 2001
Tipo de descarga
Firmware
Categoría
Fibre Channel
Importancia
OpcionalDell Technologies recomienda revisar esta actualización para determinar si se aplica a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formatos disponibles
Formato de archivo: Extrae archivos directamente al disco local
Nombre de archivo: SES_195.exe
Tamaño de archivo: 115.92 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este formato de archivo se compone de un fichero de archivos que se pueden descomprimir en un directorio del disco duro. La instalación se puede realizar desde ese directorio.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Al realizar la descarga, acepta los términos del Acuerdo de licencia de software de Dell. (en ingles)
Sistemas operativos compatibles
No procede
Instrucciones de instalación
To update the LS module SES firmware, perform the following steps:
1. Start Array Manager on the host system by clicking Start-- Programs--
Dell
OpenManage Applications-- Array Manager-- Array Manager Console.
2. Update the SES firmware on the PowerVault 660F.
a. Click Arrays-- PV660F SubSystem-- Physical Array.
b. Right-click the controller for the subsystem you wish to upgrade and
choose Download-- SES Firmware.
c. Select all the enclosure check boxes and click Next.
d. Click Browse and locate the SES195.bin file. Click Next.
e. Click Finish and OK.
NOTE: This process takes about 8 to 9 minutes for each additional LS
module in
the storage array. If the firmware update does not complete successfully,
repeat
the process until it does. This issue is not a hardware problem, but a
software-timing
issue.
f. After download completes, right-click the PV660F subsystem in Array
Manager and choose Rescan to update the properties information.
g. Right-click the enclosure in Array Manager, choose Properties, and
verify that it is using SES firmware version 1.9.5. If it is not, repeat
the download procedure.
h. Physically remove the primary LS module to cause failover.
i. Right-click the PV660F subsystem in Array Manager and choose Rescan
to update the properties information.
j. Right-click the enclosure and choose Properties to verify its
firmware level is also at version 1.9.5. If it is not, repeat the
download procedure.
k. Replace the LS module that you removed. If you have multiple
enclosures, you must verify the firmware level on every LS module
in the subsystem, one at a time.
1. Start Array Manager on the host system by clicking Start-- Programs--
Dell
OpenManage Applications-- Array Manager-- Array Manager Console.
2. Update the SES firmware on the PowerVault 660F.
a. Click Arrays-- PV660F SubSystem-- Physical Array.
b. Right-click the controller for the subsystem you wish to upgrade and
choose Download-- SES Firmware.
c. Select all the enclosure check boxes and click Next.
d. Click Browse and locate the SES195.bin file. Click Next.
e. Click Finish and OK.
NOTE: This process takes about 8 to 9 minutes for each additional LS
module in
the storage array. If the firmware update does not complete successfully,
repeat
the process until it does. This issue is not a hardware problem, but a
software-timing
issue.
f. After download completes, right-click the PV660F subsystem in Array
Manager and choose Rescan to update the properties information.
g. Right-click the enclosure in Array Manager, choose Properties, and
verify that it is using SES firmware version 1.9.5. If it is not, repeat
the download procedure.
h. Physically remove the primary LS module to cause failover.
i. Right-click the PV660F subsystem in Array Manager and choose Rescan
to update the properties information.
j. Right-click the enclosure and choose Properties to verify its
firmware level is also at version 1.9.5. If it is not, repeat the
download procedure.
k. Replace the LS module that you removed. If you have multiple
enclosures, you must verify the firmware level on every LS module
in the subsystem, one at a time.
Ayuda para controladores y tutoriales
Para ver más descargas, vaya a Controladores y descargas. Para obtener ayuda sobre cómo usar la información de esta página, visite Tutoriales y ayuda para controladores.