INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
LS-120 Drive Firmare Utility
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
This utility updates the firmware on the LS-120 Drive, DP/N 042YKW, used on the Dell PowerEdge 7150 platform. It must be run from the EFI shell.
Dell Technologies recomienda revisar esta actualización para determinar si se aplica a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Formato de archivo:Una o varias imágenes de disco autoextraíbles dentro de un zip autoextraíble
Nombre de archivo:B6T70600.exe
Tamaño de archivo:493.5 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
1. Get 1 blank, formatted floppy disks. 2. Click the new icon on the desktop. The Self-Extractor window appears. 3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive. 5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette. 7. Repeat steps 4 – 6 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
The unpack utility is DOS based. Run the executable file on a Windows based machine (not IA64), the following files will be unpacked and copied to a standard 1.44MB formatted floppy.
Place the floppy in the Ls-120 drive and Boot to the EFI Boot Manager Screen Select the EFI Boot option Should see the Device mapping table Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives The LS-120 will have a description of Primary Master or Device 00. The Hard Drive will have a description of Scsi or Device 80. The command "map –r" will remap the devices. If the Device 80 or Scsi is FS1 then type: "FS1:" to change to the hard drive. Type: "dir" to print a directory to the screen. This is the main directory where the files should be copied. Should also see the dellup Directory. Copy the five files to the hard drive, (verify fs0 corresponds to the floppy drive) type: "copy fs0:auto.prm" the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]
Type: "update" the utility will begin the following should appear on the screen.
Beginning Update Process New revision (file): C936M924 Old revision (ROM): C932M923
Note: If the Old revision number does not appear here then this drive cannot be updated !
Continue with the update of the Flash-EEPROM? (y/n) Type: "y"
Loader F/W Revision: 101 Erase Processing Erase OK Write Processing Write OK Flash Load: OK
The flash has completed and you are then returned to the EFI Prompt.