No apague el equipo ni lo desconecte de la fuente de alimentación mientras actualiza el BIOS, ya que podría dañarlo. Durante la actualización, el equipo se reiniciará y verá una pantalla negra durante unos instantes.
Lea las instrucciones de instalación y la información que se muestra a continuación antes de la actualización.
Dell Latitude X200 System BIOS, A09
INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Dell X200 System BIOS v. A09
Recomendado
Encuentre la mejor descarga para su sistema
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
The following items were updated from A08 BIOS:
1. Addresses internal 3com network device issue during hand install of Windows 2000. 2. Addresses intermittent issue with Floppy BIOS flash flashing properly. 3. Addresses intermittent issue with delays during DELL Manufacturing Diagnostics BIOS flash.
Dell Technologies recomienda revisar esta actualización para determinar si se aplica a su sistema. La actualización contiene cambios que afectan solamente a ciertas configuraciones u ofrecen nuevas funciones que pueden aplicarse o no a su entorno.
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Una o varias imágenes de disco autoextraíbles dentro de un zip autoextraíble
Nombre de archivo:A09_X200.exe
Tamaño de archivo:1.1 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
No disponible
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Ejecutable de Flash BIOS
Nombre de archivo:a09X200.hdr
Tamaño de archivo:1.05 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este formato de archivo se compone de un archivo ejecutable del BIOS. Para actualizar su sistema, descargue el archivo y guárdelo en su equipo de sobremesa o el disco duro y, a continuación, ejecute el archivo ejecutable. Para actualizar el BIOS, el sistema debe tener conexión de alimentación de CA y un nivel de carga de la batería de al menos el 10 %.
1. Click Download Now, to download the file. 2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. 5. Insert a floppy disk into the floppy disk drive. 6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 7. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. If the procedure requires more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy drive. 2. Click Start, click Shutdown, click Restart, and then click OK. Windows XP Users need only click restart. 3. Follow the on-screen instructions.
Important Information
The Floppy Format is recommended for most users. Floppy format creates a bootable self-extracting disk.
The Non-packaged Format is intended for advanced users that only require the bootable disk.
Installation Instructions
Floppy Format
Creating the disk:
This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.
Click Download now from the Download and install section, to begin. The File Download window appears.
Click Save this program to disk.
In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.
When the file download is complete, click Close button. Close all open windows.
Double-click the down loaded file a09X200.hdr on your Desktop. If the Security Warning window appears, click Yes.
Click the Setup button. A black MS-DOS window appears.
Press the <Enter> key.
Insert a formatted floppy disk in the floppy disk drive and press the <Enter> key.
Press the <Y> key to begin copying files. The message End of the disk set appears.
Press the <Enter> key.
Click the Start button,
Click the Run button.
Type a: in the Open box and click OK. A list of files on the floppy disk appears.
Close all open windows and leave the disk in the floppy drive.
If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.