ASENNETTU AUTOMAATTISESTITämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
ST3750630AS ST31000340AS
Suositellut
Etsi paras lataus järjestelmällesi
Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.
Hae tukea
Anna Dell-palvelutunniste tai -malli
Haluatko etsiä tuotteesi? Anna tuotetunnistin.Ohjeet
Tuloksia ei löytynyt. Haku ei tuottanut tuloksia. Muokkaa hakua ja yritä uudelleen
Tämä ajuri ei ole yhteensopiva
Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.
Kirjaudu Windowsiin järjestelmänvalvojana, jotta voit käyttää automaattista tarkistusta. Jos olet jo kirjautunut järjestelmänvalvojana ja näet tämän viestin, käynnistä järjestelmä uudelleen.Järjestelmänvalvoja hallinnoi järjestelmääsi, minkä vuoksi ominaisuuksia voi olla rajoitettu.
Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.
Korjaukset ja parannukset
The DE13 firmware corrects potential hang on power up. Drive will appear not accessible after hang.
Firmware DE13 fixes potential hang on power up on Seagate 3.5" 7200RPM HDD''s Model #''s:
Dell Technologies kehottaa asentamaan tämän tärkeän päivityksen mahdollisimman nopeasti. Päivitys sisältää keskeiset virheenkorjaukset ja muutokset, jotka parantavat Dell-järjestelmän toimintoja, luotettavuutta ja vakautta. Se voi sisältää myös suojauskorjauksia ja muita ominaisuuksien parannuksia.
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedosto sisältää pakattuja (zipattuja) tiedostoja. Lataa tiedosto kiintolevyllä olevaan kansioon ja pura tiedostot suorittamalla tiedoston (kaksoisnapsauttamalla sitä). Suorita asennus loppuun toimimalla ohjeiden mukaan.
Tiedostomuoto:Itsepurkautuvan zip-tiedoston sisällä on yksi tai useampi itsepurkautuva levykuva
Tiedostonimi:BR213714.exe
Tiedoston koko:1.03 MB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedosto sisältää pakattuja (zipattuja) tiedostoja. Lataa tiedosto kiintolevyllä olevaan kansioon ja pura tiedostot kaksoisnapsauttamalla tiedostoa. Suorita asennus loppuun toimimalla ohjeiden mukaan.
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable Diskette:
1. Perform a full backup of your data. 2. Click on the (BR213714.EXE) file and select "RUN" then "RUN" again. 3. Choose "Continue" in the next window to create a bootable floppy. 4. Close all applications and restart system. 5. Press F12 and insert the floppy disk containing the firmware update. 6. Select boot from Floppy. 7. The Seagate Firmware Update will start automatically. 8. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 9. Once completed, a message indicating process completion will appear. 10. Remove the floppy diskette and power off your system. 11. Power on your system to continue normal operation. Custom Instructions for R213714.EXE:
* PLEASE PRINT THE FOLLOWING INSTRUCTIONS *
* Please note that if your drive is connected to an add-in or onboard controller designated for SAS (Serial Attached SCSI) then you will need to connect your drives to the onboard SATA controller to perform the update. *
(PLEASE DON'T INTERRUPT THE FIRMWARE UPDATE PROCESS)
For Bootable CD option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. Refer to your CD burning application instructions to create a bootable CD using the provided file "C:\DELL\Drivers\R213714\CD Image\Seagate Utility.ISO". 5. Restart your system. 6. Press F12 and insert the CD containing the firmware update. 7. Select boot from CD/DVD. 8. The Seagate utility will start automatically. 9. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 10. Once completed, a message indicating process completion will appear. 11. Remove the CD and power off your PC. 12. Power on your PC to continue normal operation.
For Bootable USB key option
1. Perform a full backup of your data. 2. Click on the (R213714.EXE) file and select "RUN" then "RUN" again. 3. Press "Continue" then "OK" to extract the files to the provided location. 4. The files are located in "C:\DELL\Drivers\R213714\Files" directory. 5. Add the files to your bootable USB key. 6. Restart your system. 7. Insert your USB key containing the firmware update. 8. Press F12 and choose boot from USB 9. The Seagate utility will start automatically. 10. The utility will autoscan and update the appropiate Seagate ST3750630AS and ST31000340AS. 11. Once completed, a message indicating process completion will appear. 12. Remove the Bootable Media and power off your system.