Uudelleenkäynnistys vaaditaanASENNETTU AUTOMAATTISESTITämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.
Suositellut
Etsi paras lataus järjestelmällesi
Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.
Hae tukea
Anna Dell-palvelutunniste tai -malli
Haluatko etsiä tuotteesi? Anna tuotetunnistin.Ohjeet
Tuloksia ei löytynyt. Haku ei tuottanut tuloksia. Muokkaa hakua ja yritä uudelleen
Tämä ajuri ei ole yhteensopiva
Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.
Kirjaudu Windowsiin järjestelmänvalvojana, jotta voit käyttää automaattista tarkistusta. Jos olet jo kirjautunut järjestelmänvalvojana ja näet tämän viestin, käynnistä järjestelmä uudelleen.Järjestelmänvalvoja hallinnoi järjestelmääsi, minkä vuoksi ominaisuuksia voi olla rajoitettu.
Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.
Korjaukset ja parannukset
Fixes - Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements - Enhanced the device ready time, allowing system to be able to power up quickly.
Dell Technologies suosittelee tarkistamaan, koskeeko tämä päivitys järjestelmääsi. Päivitys sisältää muutoksia, jotka koskevat vain tiettyjä kokoonpanoja tai jotka tarjoavat ominaisuuksia, jotka eivät ehkä sovellu asiakkaan ympäristöön.
1. Equipment needed, a CD drive, a blank CD. 2. Do not POWER OFF the system during the firmware update procedure. 3. Please perform a full system backup before starting the firmware update procedure (highly recommended). 4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended). 5.The firmware utility tool is OS independent.
Backup 1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction 1. Click Download File to download the zipped file. 2. Extract the file into a folder. 3. The ISO image file is used to burn the utility onto a bootable CD.
Installation 1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended). 2. DO NOT remove power from the system during the firmware update process. 3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode. 4. Ensure that your BIOS boot order has been set up to boot from CD drive a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting. 5. Insert the bootable CD media with ISO image into your system. 6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically. 7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen. 8. Select Yes to the request 'Update firmware on this drive?' 9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete. 10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.