LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, PERC 4/Di, CERC ATA 100, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, v.5.48.0.0, A04
ASENNETTU AUTOMAATTISESTITämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Dell PowerEdge RAID Controller 4e/Di, 4e/Si, 4e/DC, 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, PERC 4/Di, and CERC ATA100/4CH Device Driver for Windows 2000.
Version: 5.48
Suositellut
Etsi paras lataus järjestelmällesi
Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.
Hae tukea
Anna Dell-palvelutunniste tai -malli
Haluatko etsiä tuotteesi? Anna tuotetunnistin.Ohjeet
Tuloksia ei löytynyt. Haku ei tuottanut tuloksia. Muokkaa hakua ja yritä uudelleen
Tämä ajuri ei ole yhteensopiva
Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.
Kirjaudu Windowsiin järjestelmänvalvojana, jotta voit käyttää automaattista tarkistusta. Jos olet jo kirjautunut järjestelmänvalvojana ja näet tämän viestin, käynnistä järjestelmä uudelleen.Järjestelmänvalvoja hallinnoi järjestelmääsi, minkä vuoksi ominaisuuksia voi olla rajoitettu.
Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.
Korjaukset ja parannukset
During Bus Reset, the driver issues a call to the firmware and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the firmware even before the Reset call completed resulting in the Reservation conflict. Now the driver does not issue the next command until the reset call to the firmware completes.
Dell Technologies suosittelee asentamaan päivityksen seuraavan päivityskierroksen yhteydessä. Päivitys sisältää muutoksia järjestelmän yleisen kunnon säilyttämiseksi. Se varmistaa, että järjestelmäohjelmisto pysyy ajan tasalla ja yhteensopivana muiden järjestelmämoduulien kanssa (laiteohjelmisto, BIOS, ohjaimet ja ohjelmistot) ja sisältää myös muita uusia ominaisuuksia.
Tiedostomuoto:MS Windows -päivityspaketti (32-bittinen)
Tiedostonimi:RAID_DRVR_WIN_R99973.EXE
Tiedoston koko:1.13 MB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Microsoft Windowsin 32-bittiset Dellin päivityspaketit (DUP) on tarkoitettu suoritettavaksi 64-bittisessä Microsoft Windows -käyttöjärjestelmässä. Microsoft Windowsin 64-bittiset Dellin päivityspaketit (DUP) toimivat vain 64-bittisessä Microsoft Windows -käyttöjärjestelmässä. Kun valitset laiteohjainpäivitystä, muista valita oman käyttöjärjestelmäsi mukainen versio.
Tiedostomuoto:Purkaa tiedostot suoraan paikalliselle levylle
Tiedostonimi:perc-cerc-w2k-5.48-A04.exe
Tiedoston koko:75 KB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedostomuoto käsittää tiedostoarkiston, joka voidaan purkaa kiintolevyllä olevaan hakemistoon. Asennus voidaan sitten suorittaa kyseisestä hakemistosta.
Custom Instructions for perc-cerc-w2k-5.48-A04.exe:
This is a self-extracting package of the Windows 2000 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.
To build the installation diskette, execute the package, directing its output to an empty formatted diskette.
Refer to the readme file perc-cerc-w2k-5.48-A04.txt for further driver installation instructions.
Updating an Existing Windows 2000 Driver ----------------------------------------
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Settings > Control Panel > System. The System Properties screen displays. 2. Click on the Hardware tab. 3. Click the Device Manager and the Device Manager screen displays. 4. Click SCSI and RAID Controllers. 5. Double-click the RAID controller for which you want to update the driver. 6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays. 7. Insert the appropriate driver diskette. 8. Click Next. 9. Follow the steps in the Wizard to search the diskette for the driver. 10. Select the INF file from the diskette. 11. Click Next and continue the installation steps in the Wizard. 12. Click Finish to exit the wizard and reboot the system for the changes to take place. Custom Instructions for perc-cerc-w2k-5.48-A04.txt:
Download the readme file 'perc-cerc-w2k-5.48-A04.txt' to view information about this release. Dell Update Package Instructions for RAID_DRVR_WIN_R99973.EXE:
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Install any necessary Embedded Systems Management firmware prior to this BIOS update. 5. Click the Install button. 6. Follow the remaining prompts to perform the update.