Älä sammuta tietokonetta tai irrota sitä virtalähteestä BIOS-päivityksen aikana. Muutoin tietokone voi vahingoittua. Päivityksen aikana tietokone käynnistyy uudelleen ja näyttö saattaa pimentyä hetkeksi.

Lue alla olevat asennusohjeet ja tärkeät tiedot ennen päivittämistä.

Dell OptiPlex System BIOS, A10

ASENNETTU AUTOMAATTISESTI Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Optiplex GX1 / NX1 / GX1p A10 FlashBIOS
Suositellut

Etsi paras lataus järjestelmällesi

Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.

Hae tukea

Anna Dell-palvelutunniste tai -malli

Haluatko etsiä tuotteesi? Anna tuotetunnistin. Ohjeet

Tämä ajuri ei ole yhteensopiva

Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.

Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.

Korjaukset ja parannukset

The following changes have been made to BIOS revision A09 to create A10.

1. New NIC.ROM to fix booting across Cisco routers. Version .99n.02
2. Updated the copyright to 2001.
Lisätietoja

Versio

A10, A10

Julkaisupäivä:

10 syysk. 2001

Lataustyyppi

Järjestelmän BIOS

Luokka

BIOS

Tärkeys

Valinnainen
Dell Technologies suosittelee tarkistamaan, koskeeko tämä päivitys järjestelmääsi. Päivitys sisältää muutoksia, jotka koskevat vain tiettyjä kokoonpanoja tai jotka tarjoavat ominaisuuksia, jotka eivät ehkä sovellu asiakkaan ympäristöön.
Käytettävissä olevat muodot

Tiedostomuoto: Itsepurkautuvan zip-tiedoston sisällä on yksi tai useampi itsepurkautuva levykuva
Tiedostonimi: BGX1_A10.exe
Tiedoston koko: 366 KB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedosto sisältää pakattuja (zipattuja) tiedostoja. Lataa tiedosto kiintolevyllä olevaan kansioon ja pura tiedostot kaksoisnapsauttamalla tiedostoa. Suorita asennus loppuun toimimalla ohjeiden mukaan.
Varmista latauksen eheys vahvistamalla tarkistussumman arvo.
MD5:
Ei saatavana
SHA1:
Ei saatavana
SHA-256:
Ei saatavana

Tiedostomuoto: Suoritettava Flash BIOS
Tiedostonimi: Gx1_a10.exe
Tiedoston koko: 209.96 KB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedostomuoto on suoritettava BIOS-tiedosto. Voit päivittää järjestelmän lataamalla tiedoston, tallentamalla sen tietokoneen työpöydälle tai kiintolevylle ja suorittamalla sitten ohjelmatiedoston. Jotta voit päivittää BIOSin, järjestelmän on oltava kytkettynä verkkovirtaan ja akun lataustason on oltava vähintään 10 %.
Varmista latauksen eheys vahvistamalla tarkistussumman arvo.
MD5:
Ei saatavana
SHA1:
Ei saatavana
SHA-256:
Ei saatavana

Lataamalla tiedoston hyväksyt Dellin ohjelmiston käyttöoikeussopimuksessa (englanniksi) määritetyt ehdot.

OPTIPLEX 330 SYSTEM BIOS
OptiPlex System BIOS
Floppy
Creating the disk:
NOTE: This procedure requires one blank, formatted 3.5-inch floppy disk;
label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Find the downloaded file on your Desktop, if it looks like a
floppy disk, double-click it and skip to Step 7.

NOTE: If the Security Warning window appears, click “Yes”.


7. Click “Setup”.
A DOS Window appears.
8. Press the “Enter” key.
9. Insert the floppy disk into the floppy disk drive and press
the “Enter” key.
10. Press the “Y” key to begin copying files.
An End of the disk set prompt appears.
11. Press the “Enter” key.
12. Click the “Start” button, click “Run”, and then type a: in the
Open box. Click “OK’.
The list of files on the floppy disk appears.
13. If there is a readme file in the list, double-click it for
additional instructions.
14. Close all open windows and leave the disk in the floppy drive.
Skip to the section Flashing the BIOS below

NOTE: If you are creating this disk on another computer, remove the disk.
Then insert it into the system that needs the BIOS flashed, and resume the
procedure.

Non-Packaged
Creating the disk:
NOTE: This procedure requires one blank bootable, formatted 3.5-inch
floppy disk; label the disk BIOS.

1. When the File Download window appears, click “Save this program to
disk”.
2. Choose “Desktop” as the location.
3. Click “Ok”.
4. After the file has finished copying files, click “Close”.
5. Press the “Windows” + “M” keys at the same time to minimize all
the open windows.
6. Insert the blank bootable formatted 3.5-inch floppy disk.
7. Right-click the copy of the file, point to “Send To”, click “3 1/2
Floppy (a)”, and then skip to the section Flashing the BIOS below.

Flashing the BIOS:
NOTICE: Changing the system BIOS may result in unintended side affects,
such as incompatibility of the new BIOS with installed hardware. If
problems arise after a BIOS change, it may be necessary to return the
system to the original version of the BIOS.
1. If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power.
2. Ensure that the Flash BIOS disk is inserted into the floppy disk
drive.
3. Click the “Start” button, click “Shut Down”, click “Restart”, and
then click “Ok”.
The computer should restart and boot to the floppy disk.

NOTE: If the flash BIOS program does not start, and you see only an A:\
prompt, refer to the instructions from the Dell File Library page for the
BIOS update or to the Readme.txt instructions. Generally, you will type
the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS
version A10 on the OptiPlex™ series system.

A Press any key to continue prompt appears.
4. Press the “Enter” key.
A Press Y to replace old BIOS with new BIOS prompt appears.
5. Press the “Y” key.

NOTICE: Do not interrupt the system during this process. Please refrain
from pressing any keys on the keyboard, moving the mouse, or interrupting
power to the system. Failure to do so could result in damage to the system
BIOS.

When the computer has finished updating the BIOS, a Flash program
successful. Press any key to reboot prompt appears.
6. Remove the floppy disk and press the “Enter” key.
7. The computer will now restart with the new revision of the BIOS
installed.
The boot screen will indicate the BIOS version.

If you encounter device or resource errors after flashing the system BIOS,
enter the System Setup, clear the NVRAM and restore t

Tarvitsetko apua BIOS-ongelmien ratkaisemisessa?

Etsi ratkaisu Dellin BIOS-ongelmien ratkaisu- ja käyttöohjeesta.

Ohjainten ohje ja opetusohjelmat