ASENNETTU AUTOMAATTISESTITämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Dell OpenManage Network Manager delivers you automated, consolidated configuration and control of Dell PowerConnect switches. Comprehensive network management capabilities include:
• Monitoring and management of PowerConnect switches • Automation of labor-intensive and common network management operations to lower the total cost of ownership for PowerConnect switch administrators • Advanced network element discovery, remote configuration management, and system health monitoring to proactively alert network administrators to potential network problems. Network Manager is customizable, and it unifies multiple systems while still allowing event and trap forwarding to other enterprise network management systems.
Suositellut
Etsi paras lataus järjestelmällesi
Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.
Hae tukea
Anna Dell-palvelutunniste tai -malli
Haluatko etsiä tuotteesi? Anna tuotetunnistin.Ohjeet
Tuloksia ei löytynyt. Haku ei tuottanut tuloksia. Muokkaa hakua ja yritä uudelleen
Tämä ajuri ei ole yhteensopiva
Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.
Kirjaudu Windowsiin järjestelmänvalvojana, jotta voit käyttää automaattista tarkistusta. Jos olet jo kirjautunut järjestelmänvalvojana ja näet tämän viestin, käynnistä järjestelmä uudelleen.Järjestelmänvalvoja hallinnoi järjestelmääsi, minkä vuoksi ominaisuuksia voi olla rajoitettu.
Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.
Korjaukset ja parannukset
IMPORTANT: Network Manager can only be installed as an initial install or upgraded from version 4.3.
This version of Network Manager adds support for several Powerconnect J-Series, B-Series, and W-Series devices. Other features in 4.x are: • A free license is included to manage up to 10 devices. You can continue to manage any number of devices when upgrading from previous versions containing previously discovered devices, but will be required to purchase an additional license to discover additional devices. If after an upgrade you have more devices discovered than you have a license for, you will only be able to remove the devices and not be allowed to add any device until you drop below the license limit (unless you purchase an additional license). Once the number of devices fall below the licensed amount, the license limit goes into effect.
Dell Technologies suosittelee tarkistamaan, koskeeko tämä päivitys järjestelmääsi. Päivitys sisältää muutoksia, jotka koskevat vain tiettyjä kokoonpanoja tai jotka tarjoavat ominaisuuksia, jotka eivät ehkä sovellu asiakkaan ympäristöön.
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedosto sisältää pakattuja (zipattuja) tiedostoja. Lataa tiedosto kiintolevyllä olevaan kansioon ja pura tiedostot suorittamalla tiedoston (kaksoisnapsauttamalla sitä). Suorita asennus loppuun toimimalla ohjeiden mukaan.
Dell previously released free versions of this application allowing unlimited devices to be discovered and managed. With 4.x versions, unless you purchase and install an additional license, OpenManage Network Manager 4.x will limit the number of devices you can manage to 10. You can purchase additional licenses by contacting your sales representative or go to www.dell.com/networking.
If you have not installed an additional license or choose not to purchase additional licenses at this time, you can still upgrade to this version and retain/manage all of your previously discovered devices. However, you will not be able to discover any additional devices including newly supported devices unless you are below your installed license limit. Also, each time you remove a device from discovered devices, you will not be allowed to add the device back unless you are below the installed license limit.
As always, it is recommended that you backup your OMNM database if you are upgrading. Refer to the User Guide that came with this application for backup procedures.