AUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
This software contains the Windows 2003 driver for the DELL PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
Fixes/Enhancements - A new install section has been created for the Perc2 controller that does not remove the hibernation filter driver binary and service. -Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8 -Modified unknown AIF handling to prevent Driver Verifier hang. -STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure. Invalid memory address for the input buffer.A null input buffer. -Deletes perc2hib reference in lower filter list rather than entire filter list via inf. -Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack. -Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows. -Added support for new vSCSI implementation
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Format de fichier :Package de mise à jour pour Microsoft Windows 32 bits
Nom du fichier :RAID-DRVR-R74084.exe
Taille du fichier :1.28 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les packages DUP (Dell Update Packages) au format Microsoft Windows 32 bits ont été conçus pour fonctionner sur les systèmes d’exploitation Microsoft Windows 64 bits. Les packages DUP (Dell Update Packages) au format Microsoft Windows 64 bits fonctionnent uniquement sur les systèmes d’exploitation Microsoft Windows 64 bits. Assurez-vous de choisir la mise à jour de pilote de périphérique adaptée à votre système d’exploitation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
834FD98768A3B7770A369091794E4A3E
SHA1 :
Non disponible
SHA-256 :
Non disponible
Format de fichier :Extrait des fichiers directement vers le disque local
Nom du fichier :w2k3-2806085.exe
Taille du fichier :259.5 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier comprend une archive de fichiers qui peut être décompressée sur un répertoire du disque dur. L’installation peut être effectuée à partir de ce répertoire.
This software code release requires all V2.8 components; firmware, device driver and management utilities. Using some components from previous releases may cause some unknown errors. Also, this driver will report one of two versions depending on where you look. In Device Manager, it will report as version 2.8-0.6085, but in the file properties (and in OMSS) it will report as version 2.8-0.6076. This is a known cosmetic-only issue and causes no functional problems.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files. 3. Click on the unzip button to extract files.
Driver Installation for Windows Server 2003 ============================================
NOTE: Before you perform the upgrade, uninstall the Controller Management Software (CLI). See the installation guide associated with your controller for instructions on how to uninstall the Controller Management Software.
To upgrade the Windows 2003 driver to V2.8 for PERC 2 and/or integrated controller, perform the following steps:
NOTE: You must be logged on as Administrator to perform these steps:
1. From the desktop, right-click the My Computer icon. 2. Left-click Manage. 3. Click Device Manage. 4. Double-click SCSI and RAID Controller. A List of all currently installed SCSI drivers appears. 5. Double-click the appropriate RAID controller (such as PERC 2 Controller). 6. Select the Driver tab. 7. Select Update Driver. The Update Device Driver Wizard appears. 8. Click Next.
NOTE: Selecting "Display a list of known drivers for this device so I can choose a specific driver" on PE2500 and PE2550 systems will give you "Update driver warning".
9. Click Install from a list or specific location. 10. Click Next 11. Click Don't Search, I will choose the driver to install. 12. Click Next 13. Click Have Disk... 14. Insert the Windows 2003 driver diskette. 15. Select the floppy drive in the "Copy manufacturer's files from:" drop-down box. 16. Click OK. 17. Click Next. If the driver copy confirmation dialog box pops up, click Yes. 18. Click Finish. 19. Shut down and reboot the system