Adaptec CERC SATA1.5/6ch, v.4.1.0.7419, A17

AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
CERC SATA 1.5/6ch RAID Controller Firmware version 4.1.0.7419.

Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

Release Highlights - Fixes:
The following defects have been fixed.

- Corrects issue seen where hard drives were being taken offline while using certain utility Softwares to create snapshots of the partition images.
- Corrects issues seen with Maxtor SABRE hard drives during POST where intermittent "SMART N/A" messages were reported by the controller on multiple reboots.
- Corrects intermittent issues where controller lockups are seen with some hard drive''s Smart errors during POST.
- Corrects contradictory multiple BBR messaging in Array Manager/OMSS logs when bad blocks are encountered on hard drives.

En savoir plus

Version

4.1.0.7419, A17

Date de publication :

17 juil. 2007

Type de téléchargement

Micrologiciels

Catégorie

Stockage

Importance

Recommandé
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Formats disponibles Afficher les informations importantes

Format de fichier : Package de mise à jour pour Microsoft Windows 32 bits
Nom du fichier : FRMW_WIN_R155588.EXE
Taille du fichier : 3.01 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les packages DUP (Dell Update Packages) au format Microsoft Windows 32 bits ont été conçus pour fonctionner sur les systèmes d’exploitation Microsoft Windows 64 bits. Les packages DUP (Dell Update Packages) au format Microsoft Windows 64 bits fonctionnent uniquement sur les systèmes d’exploitation Microsoft Windows 64 bits. Assurez-vous de choisir la mise à jour de pilote de périphérique adaptée à votre système d’exploitation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
B1D285026FE5CBA45B7A41D90E77B6F6
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : Une ou plusieurs images de disque dans un zip (tous à extraction automatique)
Nom du fichier : BR155588.exe
Taille du fichier : 1.25 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur et double-cliquez dessus pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
2c352edb01dad60d870a8d023d3f523a
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : Un fichier GnuPG qui contient une signature cryptographique
Nom du fichier : FRMW_LX_R155588.BIN.sign
Taille du fichier : 194 Bytes
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
La signature GnuPG pour le progiciel de mise à jour Red Hat Linux peut être utilisée pour authentifier l’identité Dell dans le progiciel de mise à jour Red Hat Linux en corrélation.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
DE0AACC57951F51B8C97730CB291C032
SHA1 :
Non disponible
SHA-256 :
Non disponible

Format de fichier : Package de mise à jour pour Red Hat Linux
Nom du fichier : FRMW_LX_R155588.BIN
Taille du fichier : 5.43 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Les progiciels de mise à jour Dell pour Linux peuvent être utilisés comme applications autonomes garantissant que les critères de validation spécifiques sont respectés, appliqués, puis mis à jour.
Remarque : les progiciels de mise à jour pour Linux sont de type Open Source. Pour en savoir plus, reportez-vous au fichier Lisez-moi des progiciels de mise à jour Dell pour Linux.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
B3C751EBC78588FAC0C5CD0B8EDE090A
SHA1 :
Non disponible
SHA-256 :
Non disponible

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
NOTE: The Linux DUP (Dell Update Package) package on this release may not work on RHEL5. It does work on earlier versions of RHEL. In cases where it does not work, the web pack will have to be used to perform this update.
CERC SATA1.5/6ch
INFO,PWS470,C3,SATA,R0,3 HDD
INFO,PWS670,C3,BOOTNO,S,R03HD
INFO,PWS670,C3A,BOOTNO,S,R04HD
Custom Instructions for BR155588.exe:

Floppy Disk Boot to Disk for cerc7417_a15.exe

Download
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Hard Drive Floppy Disk Creation
1. Get 2 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black DR-DOS window appears with a message
indicating that you need 2 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette. Insert
a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 4 – 6 until you reach the end of the
diskette set.
7. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the DR-DOS window closes.

Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.


Firmware Installation
==============================================

Performing the CERC SATA 6ch Firmware Upgrade in Interactive Mode
----------------------------------------------------------

The AFU includes an interactive mode.

To update the firmware using the AFU interactive mode,
follow these steps:

1. Shut down your system.
2. Reboot the system with the diskette labeled:

Dell CERC SATA 6ch Firmware
Disk 1 of 2

3. At the DOS prompt, enter the following command and
press [ENTER]:

afu

This starts the AFU in interactive mode. The AFU will detect the installed CERC SATA 6ch controllers.

4. A menu will be presented. Select the following
option:

Update flash image

6. The AFU will issue the following message:

Update from the flash image in directory:
A:\
Change the directory if necessary, then use the TAB
key to select the OK box, and press [ENTER].

7. AFU will issue this message:

Reading flash image file...
Please insert disk labeled "Dell CERC SATA 6ch Firmware disk 2".

8. Insert the second diskette and press [ENTER].

9. AFU will complete reading the flash image, then AFU
will issue this message:

AFU is about to update firmware on controllers Dell CERC SATA 6ch

10. Select the OK box, then press [ENTER]. AFU will proceed
to update the firmware. You will see the following
message:

Writing CERC SATA 6ch Flash image to controller 0 ...

This message will be followed by additional progress
messages. When the flash update has completed, you
will see this message:

Flash image was updated and verified successfully.

11. Press any key, then press the ESC key to exit AFU.

12. Remove any diskettes from the drive and reboot the
system.
Instructions for FRMW_LX_R155588.BIN:

Download

1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation

1. Read over the release information presented by executing the ./FRMW_LX_R155588.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing .

Aide et didacticiels sur les pilotes