PowerConnect, M8024-k, v5.0.0.4, A08

Redémarrage requis AUTO-INSTALLATION Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
This firmware is for the M8024-K version of PowerConnect switch and has new features and bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
Recommandé

Trouver le meilleur téléchargement pour votre système

Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.

Rechercher dans le support

Saisir votre modèle ou numéro de série Dell

Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit. Comment faire

Ce pilote n’est pas compatible

Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.

Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.

Correctifs et améliorations

Fixes and Enhancement:

Fixes
- OpenManage UI does not accept blank space character for port description.
- "show spanning-tree detail" counters are non-zero for inactive interfaces.
- Unable to remove 0.0.0.0 as default gateway on OOB interface using the web.
- When connecting via SSH, the user is not prompted to acknowledge the MOTD
- "encapsulation" command is unavailable in interface range mode
- M8024-k OpenManage Web UI stack view display
- "spanning-tree transmit hold-count" command's value is not reflected in show command
- Inconsistent behavior in single and range interface mode of "spanning-tree port
- CLI command "no passwords strength exclude-keyword" requires
- Inline help for "spanning-tree loopguard" is incorrect.
- Some of the options of "show ip pim" command are not available in user EXEC mode.
- Configuration command "logging " accepts more than 63 characters.
- dot1dTpPortMaxInfo is displaying maximum frame size that includes MAC header.
- If a user attempts to create a certificate request with information that is not identical to the key generated, the user is not given an error/ informative response letting them know there is a conflict between their key and their request.
- OIDagentInventorySupportedUnitExpected CodeVer provides incorrect display string 1.0.176.0
- 1. Changes are not applied to the correct interfaces on the pages "System->sFlow->Sampler Configuration" "System->sFlow->Poll Configuration" 2. Incorrect error message is displayed when not configured Receiver index is applied to interface on "System->sFlow->Poll Configuration" page.
- "show ip route configured ...longer-prefixes" reports that default gateway is not configured, which is incorrect.
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- "ipv6 pim join-prune interval" command does not work
- Macro input string does not accept more than 20 characters
- startup-config failed error message is displayed when finishing the Dell Easy Setup Wizard
- In stacking environment, "show system temperature" command output is corrupted
- Error message for port enable / disable on IE on 8024F combo ports
- Alignment issues in the output of "show voice vlan interface" command
- CLI command "show ip igmp snooping" output is truncated.
- vrrp ip command accepts invalid IP addresses
- CLI command "isdp enable" does not work for a range of ports
- "show interface Priority-Flow-Control" command output is not formatted correctly
- CLI command "show ip route 192.168.2.2 /24" not ignoring host bits.
- Port channel goes down during master failover.
- switches rebooting - possible crash dump w/ emWeb
- general mode vlan does not show up after a reload, it shows up in access vlan
- SNMP OIDs 1.3.6.1.4.1.674.10895.3000.1.2.110.7.x causing switch crash
- Stack ARP Problem
- Stack member units port display is missing in web GUI.
- No response to ICMP with jumbo (ping)
- Ports connected to Intel X520 NIC do not return online after reboot.
- switch reboots randomly.

Enhancements
- 802.1Qaz (ETS) on 8100 series
- Added Native EEE Support for the PC8100 10GBaseT Ports
- Support for 40 Gig (QSFP+) interfaces
- Support for Bootcode upgrade from pre-4.x image to 5.x image without manual system reset.
- Local Preference for LAG
- Full Private VLAN
- CLI output filtering
- Routing Improvements for OSPF
- UDLD
- Administrative Profiles
- AAA Authorization
- TACACS+ Accounting
- Stacking over QSFP+ ports
- QSFP+ diagnostics
- sFlow Support on Port Channels
En savoir plus

Version

v5.0.0.4, A08

Date de publication :

29 août 2012

Type de téléchargement

Micrologiciels

Catégorie

Réseau

Importance

Recommandé
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Formats disponibles Afficher les informations importantes

Format de fichier : Extrait des fichiers directement vers le disque local
Nom du fichier : PCM8024kv5.0.0.4a08.zip
Taille du fichier : 13.02 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce format de fichier comprend une archive de fichiers qui peut être décompressée sur un répertoire du disque dur. L’installation peut être effectuée à partir de ce répertoire.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
MD5 :
82d872fa083700ac8b8b2926e4035c8b
SHA1 :
f49187d2d940705d64d4cdf6c43b01be34b177c8
SHA-256 :
0339219fe1fde9805ab19f787af51fa4a0361666bc9e5c80b6588604ffad4462

En effectuant le téléchargement, vous acceptez les conditions du Contrat de licence logicielle Dell. (en anglais)

Détails supplémentaires

Afficher tout | Masquer tout
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"
PowerConnect M8024-K
Please follow software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x to 5.0.0.4 Firmware.pdf"

Reboot will be required

Vous avez besoin d’aide pour résoudre des problèmes de connexion réseau ?

Trouvez une solution dans le guide Dell d’utilisation et de dépannage du réseau.

Aide et didacticiels sur les pilotes