Pour plus d’informations utiles, reportez-vous à notre base de connaissances. Consultez l’article.
Dell ControlVault, v.1.2.00208.033, A08
AUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
6.100.153 Production USH Firmware CID7
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
- Functionality fixes / workaround for various Smart Cards - Fix for firmware lock when removing a Smart Card after being asked for a PIN - Fix for DOS upgrade error for systems with Upek sensor - Enumeration changes to disallow USB transactions until fully enumerated by the host
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur, puis exécutez-le (double-clic) pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Custom Instructions for Dell_ControlVault_A08_R214858.exe:
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
----------------- UPDATE PROTECTION ----------------- Please note: The BCM5880 firmware update process contains 2 protection mechanisms to prevent unauthorized updates.
Protection Mechanism 1: TPM Deactivation.
If the Trusted Platform Module (TPM) on the target computer has ever been activated in the past, in order to update the BCM5880 firmware, the TPM must be set to ON and DEACTIVE in the BIOS SETUP program before the firmware update will run. If the TPM on the target platform has never been activated previously, then this step is NOT necessary.
Protection Mechanism 2: Anti-Hammering.
The BCM5880 is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the BCM5880 will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the BCM5880 has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
-------- DOWNLOAD -------- 1. Click Download Now, to download the file. 2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
---------------- EXTRACT FIRMWARE ---------------- 6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears. 7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx. 8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted. 9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------ Installation/Update From MS-DOS. ------------------------------------------ The BCM5880 firmware must be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc) 11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation. 12. Shut down your computer and boot to the bootable MS-DOS disk 13. Switch to the folder that was created in step 11. 14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------ Installation/Update From Windows XP. ------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware) 11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system. 12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------ Installation/Update From Vista. ------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware) 11. R