Dell BMC Firmware, v.1.83, A10
ΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗ Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
The Baseboard Management Controller (BMC) flash utility is a tool to update firmware (FW) to the Baseboard Management Controller. This firmware update is a non-destructive update. User data is not affected.
Συνιστάται
Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σαςΑναζήτηση στην τοποθεσία υποστήριξης
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος. Δείξτε μου πώς
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση. Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
Fix the incorrect entity instance number of CPUs and PSUs shown in the inventory info of VMware ESX.
Διαβάστε περισσότεραΈκδοση
1.83, A10
Ημερομηνία κυκλοφορίας
30 Ιουν 2009
Τύπος λήψης
Firmware
Κατηγορία
Ενσωματωμένη διαχείριση διακομιστών
Σπουδαιότητα
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Διαθέσιμες μορφές View Important Information
Μορφή αρχείου: Πακέτο ενημέρωσης για MS Windows 32 Bit
Όνομα αρχείου: BMC_FRMW_WIN_R223068.EXE
Μέγεθος αρχείου: 4.5 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
A245A0CE2491B8B5C8BF287BA09B15E8
SHA1:
Not available
SHA-256:
Not available
Μορφή αρχείου: A GnuPG file which contains a cryptographic signature
Όνομα αρχείου: BMC_FRMW_LX_R223068.BIN.sign
Μέγεθος αρχείου: 194 Bytes
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
C4CE3FD61A3C8261616EA234A40EAF46
SHA1:
Not available
SHA-256:
Not available
Μορφή αρχείου: Τα αρχεία εξάγονται απευθείας σε τοπικό δίσκο
Όνομα αρχείου: PE1850BmcA10.exe
Μέγεθος αρχείου: 265 KB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
3f94215329b9d68a9053702ddfd84722
SHA1:
Not available
SHA-256:
Not available
Μορφή αρχείου: Update Package for Red Hat Linux
Όνομα αρχείου: BMC_FRMW_LX_R223068.BIN
Μέγεθος αρχείου: 3.62 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
F6CB9FEF221498CC1690DE2256361163
SHA1:
Not available
SHA-256:
Not available
Κάνοντας λήψη αποδέχεστε τους όρους της Συμφωνίας άδειας χρήσης λογισμικού της Dell.
Σημαντικές πληροφορίες
###############################################################
Important Information for Update Packages for Microsoft Windows
###############################################################
* Do not run other applications while executing Dell Update Packages.
* When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
* When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source "IPMIDRV" with Event ID 1004 are logged in the System Log in the Event Viewer console.
These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
###################################################
Important Information for Update Packages for Linux
###################################################
* Do not run other applications while executing Dell Update Packages.
* If the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"
* Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at "support.dell.com".
Important Information for Update Packages for Microsoft Windows
###############################################################
* Do not run other applications while executing Dell Update Packages.
* When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
* When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source "IPMIDRV" with Event ID 1004 are logged in the System Log in the Event Viewer console.
These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command "rundll32 ipmisetp.dll, RemoveTheDevice" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command "rundll32 ipmisetp.dll, AddTheDevice". On PowerEdge x9xx servers, the driver can be re-installed by performing a "Scan for hardware changes" in the Device Manager.
For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
###################################################
Important Information for Update Packages for Linux
###################################################
* Do not run other applications while executing Dell Update Packages.
* If the following error occurs, "Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory", you must install the compatibility libraries from "www.redhat.com" or from the Red Hat CD. To install the compatibility libraries, use the following command: "RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"
* Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at "support.dell.com".
Οδηγίες εγκατάστασης
Instructions for BMC_FRMW_LX_R223068.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./BMC_FRMW_LX_R223068.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./BMC_FRMW_LX_R223068.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for BMC_FRMW_LX_R223068.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, BMC_FRMW_LX_R223068.BIN.sign
Instructions for BMC_FRMW_WIN_R223068.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Custom Instructions for PE1850BmcA10.exe:
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Additional Instructions
MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "BMCFL16D". This will run BMCFL16D.EXE
4. Answer at the prompt to begin the upgrade.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./BMC_FRMW_LX_R223068.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ./BMC_FRMW_LX_R223068.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for BMC_FRMW_LX_R223068.BIN.sign:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2. Verify the Dell Update Package by using its signature file, BMC_FRMW_LX_R223068.BIN.sign
Instructions for BMC_FRMW_WIN_R223068.EXE:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Custom Instructions for PE1850BmcA10.exe:
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Additional Instructions
MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "BMCFL16D". This will run BMCFL16D.EXE
4. Answer
Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης
Για περισσότερα στοιχεία λήψης, επισκεφθείτε τη διεύθυνση Προγράμματα οδήγησης και στοιχεία λήψης. Για βοήθεια σχετικά με τη χρήση των πληροφοριών σε αυτήν τη σελίδα, επισκεφτείτε τη Βοήθεια και τα εκπαιδευτικά προγράμματα οδήγησης.